- CAT6 Ethernet patch cable for connecting to LANs or the Internet
- Ideal for use with 100-1000BASE-T networks
- RJ45 plugs with 50-micron gold-plated connectors for clear signal
- 4 twisted pairs of stranded copper wires prevent crosstalk
- Snagless design prevents cracking and breaking
CONNECT EASILY TO A COMPUTER NETWORK
Upgrade your network and enjoy clean and clear transmissions with the Belkin CAT6 Ethernet Patch Cable. This patch cable lets you connect a laptop or desktop computer to a wall outlet, modem, router or another networking device. It meets the CAT6 standard and is suitable for use with 100/1000BASE-T networks. Patch cables are also handy in home offices and hotel rooms to establish a wired Internet connection.
RJ45 PLUGS WITH GOLD-PLATED CONTACTS FOR A CLEAR SIGNAL
The Belkin CAT6 Ethernet Patch Cable features an RJ45 male connector on each end. Internal load bars ensure accurate plug positioning and consistent high performance, while 50-micron gold-plated connectors resist corrosion and wear and deliver a clean, clear signal.
GIGABIT SPEEDS WITH CAT6 TECHNOLOGY
Made with Unshielded Twisted Pair (UTP) stranded copper wires, this cable meets the CAT6 Ethernet network cable standard and can support Ethernet speeds of up to 1 gigabit per second. Unlike CAT5 technology, CAT6 cables fully use all four pairs of twisted copper wires for greater bandwidth and speed.
LESS CROSSTALK WITH TWISTED PAIR WIRES
The CAT6 Ethernet Patch Cable features 4 UTP 24 AWG (American Wire Gauge) stranded copper wires to reduce electromagnetic interference. Stranded cables are more pliable than solid cables, making them better suited for travel. Plus, the wires are housed in a durable PVC outer jacket for abrasion and corrosion resistance.
Characteristic Impedence
100±15O @ 1 ~ 550MHz
Conductor Construction
Bare Stranded Copper
Conductor Resistance
93.8O/km/20°C max
Conductor Size
24AWG x 4pairs
Dielectric Strength
AC 1.5kV
Flame Retardant
Test CM
Insulation Material
HDPE
Jacket Material
PVC
Mutual Capacitance
56pF/m max
Propagation Delay
536nS/100m max @ 550MHz
Spark Test
2.5kV
Standards Compliance
ISO/IEC 11801; TIA/EIA-568-B.2-1
Structural Return Loss
8.6dB min at 550MHz
Cable Type
Cat 6
Cable Characteristic
Unshielded twisted pair (UTP)
Connector on First End
1 x RJ-45 - male
Connector on Second End
1 x RJ-45 - male
Jacket Diameter
5.9±0.15mm
Connector Type(s)
50 micron gold-plated connector
As a domestic traveller you will not be entitled to any duty free allowance and personal goods concession.
You are however able to purchase any item(s) on The Mall and take them with you on your domestic flight but please bear in mind :
- If you purchase for a flight that is departing from Auckland Airport, your items will need to fit into your carry on luggage or be safely packed into your checked in luggage
-
New Zealand's domestic flight carriers have restrictions when it comes to the weight and size of your carry on luggage and what can be carried on board. For more information see Cabin Allowances.
- If you purchase for a flight that is arriving into Auckland Airport there are no restrictions as you will be collecting your order after your flight has landed.
Your order can be picked up from The Mall's Collection Point in the Domestic Terminal before you pass through security, located between 3 Wise Men and Travelex. See map
You will need to bring your order confirmation email and your driver's licence or valid photo identification to collect your order.
If you purchase for a flight that is departing from Auckland Airport, your order will be ready to collect 1 hour before your flight departs. Your order must be collected at least 30 minutes before you depart. If you purchase for a flight that is arriving into Auckland Airport, your order will be ready to collect when you arrive.
Now, you can also place an order without traveling. Select 'Pick Up On Arrival' when adding items to cart and use the dummy flight number NZ420 as the flight code. You can select a pick up date that works for you.
When you collect your order you will have the opportunity to inspect your items and sign for them. If you are not fully satisfied with an item then our Collection Point team will be able to assist you with any returns. Our Returns & refunds provides information on how this works and also outlines the individual Retailer's returns & refunds policies.