Sennheiser HD 660 S Open-backed
HD 660S - The perfect blend of power and control, the HD 660S is a powerhouse open-back headphone with the versatility to connect you to the deepest corners of your music collection.
A Direct Connection To Your Music
Known for their engaging signatures and liquid-smooth response, HD 660S predecessors HD 650 and HD 600 shattered performance barriers in the audiophile headphone category. The HD 660S transcends the best of that storied DNA with supernatural speed and effortless instrument reproduction-even at the bookends of the frequency spectrum. Utilizing an all-new transducer and specially ventilated drive unit, the HD 660S delivers the revealing, tack-sharp detail audiophiles demand without sacrificing the engaging dynamics that make music so enjoyable.
From Our Ears To Yours
In just one listen you will understand why the HD 660S is so special. Thousands of listening sessions later its purpose is even clearer. What you hear each and every time is the result of an open-back earcup mated to a new transducer tuned for the modern audiophile. Its speedy response is perfectly suited for reproducing those frequency-stretching recordings with confidence. Thanks to an aluminum voice coil, the 38mm diaphragm remains nimble for ultra-quick impulse fidelity across the board. This activation and rest behaviour unlocks the capability to communicate tonal and spatial characteristics precisely.
The steel mesh found on the HD 660S drive unit is interesting in design but most impressive when it comes to performance. It completes the ventilated driver, offering consistent control of air displacement to reduce turbulence. As a result, diaphragm travel is pure, letting the music-and only the music-shine in a perfect balance of integrity and expression. The steel composition allows for much tighter production tolerances, ultimately contributing to remarkably consistent characteristics of each HD 660S produced. When combined with the open-back earcups, the sound emanating from each transducer is completely free to expand, just as it would in nature.
Capability, Meet Versatility.
Today's audiophile has more component choices than ever. We optimized the HD 660S for efficiency on a wider range of devices to accommodate the varying levels of power present in output amplification circuitry. At 150 ohms, the HD 660S is the perfect partner for dedicated amplifiers, A/V receivers, and audio interfaces alike-the magnet is more powerful than its predecessors, and thus easier to drive regardless of how your setup changes over time.
Handled With Care
Every HD 660S we produce has experienced a matching regimen to mate each transducer from our Ireland manufacturing facility to its opposite-channel counterpart. These tolerances are extremely narrow and when bolstered by automated assembly processes, ensure that your HD 660S experience is consistent with those all over the globe. We designed it with thoughtful, lightweight materials invisible to the acoustical system without sacrificing the durability needed for daily, all-day use. With a never-ending supply of music to consume, we wanted every touch point to be soft, luxurious, and durable for those extended listening sessions.
It's All About Connection
We packed your HD 660S with a versatile set of essential cables, each one impedance-matched with ultra-low capacitance. The 1/4-inch / 6.3mm stereo connector offers the audiophile-standard plug for connection to devices such as headphone amplifiers and A/V receivers, digital audio players, computer-based workstations, analog gear, and more. A balanced, 4.4mm connector opens a pathway to a newer generation of balanced output devices (headphone amplifiers, digital audio players, etc.) that embrace this compact plug's superior stability over time. A balanced headphone setup offers an even lower noise floor with great dynamic range when connected to balanced source/amp circuit outputs. The listener will thus experience a wider soundstage, tightly controlled transients and impossibly-clear instrument separation. Each cable is 9.8 feet / 3m long to accommodate unencumbered listening on gear deep within your shelves, studio, or desktop, and a flexible adapter is included to reduce the 6.3mm to 3.5mm. An optional balanced cable (CH 650 S) is sold separately for simplified connection to 4-pin XLR jacks.
6.35 mm / 4.4 mm Pentaconn
9 - 41,500 Hz (-10 dB)
Sound pressure level (SPL)
104 dB at 1V 1kHz
THD + N, total harmonic distortion and noise
< 0,04% (1 kHz, 100 dB)
Transducer principle (headphones)
Weight w/o cable
Approx. 260 g (without cable)
As an international traveller you are entitled to bring a certain amount/value of goods that are free of Customs duty and exempt Goods and Services tax (GST) into New Zealand. This is called your duty free allowance and personal goods concession. It is important to review these for any purchases you make on The Mall.
Your duty free allowance entitles you to bring into New Zealand the following quantities of alcohol products free of customs duty and GST provided you are over 17 years of age. You do need to be 18 years or over to purchase.
- Up to six bottles (4.5 litres) of wine, champagne, port or sherry or
- Up to twelve cans (4.5 litres) of beer
- And three bottles (or other containers) each containing not more than 1125ml of spirits, liqueur, or other spirituous beverages
Goods other than alcohol and tobacco, whether purchased overseas or purchased duty free in New Zealand, that have a combined total value not exceeding NZ$700 may also be brought as part of your personal goods concession.
When travelling overseas there are legal limits on the amount of duty free alcohol and other goods you can take with you. These amounts will vary depending on the country you are flying into. We always recommend you check the latest limits and exemptions.
Your order can be picked up at an Auckland Airport Collection Point. There is one in departures and one at arrivals in the international terminal. See map
You will need to bring your order confirmation email and show your passport to collect your order.
If you’re departing Auckland Airport, we recommend that you come to the Auckland Airport Collection Point at least 60 minutes before your flight. If you miss your pickup time or your flight details have changed please let us know as soon as possible.
When you collect your order you will have the opportunity to inspect the items and sign for them.
If you need to return an item, our Collection Point team are there to help you. You may also like to view our Returns & refunds which provides information on how this works and outlines the individual retailer's returns and refunds policies.