Fenix Bicycle LED Light BC25R Max 600 Lumens, Build-In 2600mAH Li-ion, Rechargeable Front Light
Warning: This light is a high-intensity lighting device capable of causing eye damage to the user or others. Avoid shining the light directly into anyone's eyes.
The Fenix BC25R is a lightweight, bike light specifically built for the urban environment. This light features an innovative cut-off facula line which blocks off the top of the light beam so you won't blind oncoming traffic. Equipped with a neutral white Cree XP-G3 LED for true color rendering and long life, the BC25R blasts 600 lumens 348 feet. Additional features like a one-switch control, micro USB rechargeable, battery level indicator, quick-release light mount, metal heat-dissipating structure, and IP66 rated protection make the BC25R a must-have for your bicycle commute.
Additional Features:
- Anti-glare cut-off facula line makes urban commuting safer for oncoming persons
- CREE XP-G3 neutral white LED - max 600 lumens, with a lifespan of 50,000 hours
- Built-in 2600mAh Li-ion battery
- Micro USB rechargeable
- Battery level indication and low-voltage warning
- One switch control
- Quick-release bike mount, easily operated
- Can be used as a flashlight
- All-metal heat dissipating fins
Operating Instructions
On/Off: Press and hold the switch for 0.5s to turn the light on/off.
Output Selection: With the light switched on, single click the switch to cycle through Low?Med?High?Turbo.
Flash: With the light switched on, double click the switch to enter flash, single click to turn back to general mode.
Battery level Indication: With the light switched off, single click the switch to check the battery status. The battery level indicators will display the battery status for 3 seconds.
- One light on: critical, 0% - 25%
- Two lights on: poor, 26% - 50%
- Three lights on: sufficient, 51% - 85%
- Four lights on: saturated, 86% - 100%
Charging: One standard Micro USB charging cable, which can be used for charging other digital devices, is included.
Operation: With the light switched off, remove the dust cover of the bicycle light to reveal the charging port, and plug the Micro USB end of the USB cable into the light's charging port, then connect the other end of the USB cable to a USB power adaptor.
Charging Indicator: The indicators near the switch will display charging status. Four indicators will remain constant on when the battery is fully charged.
Note:
- Once charging is completed, be sure to remove the charging cable and replace the dust cover.
- The normal charging time of the built-in battery is 2.5 hours from fully depleted to fully charged with the light off.
- Recharge the light timely when the battery level is critical, for future use.
- Recharge a stored light every three months to maintain optimal battery performance.
- Only Low output can be used while the light is being charged, but charging time will be prolonged.
Intelligent Memory Circuit: The light memorizes the last selected brightness level on General mode. When turned on again the previously used brightness level will be recalled.
Overheat Protection: The light will accumulate a lot of heat when working on Turbo mode. The light will automatically step down a few lumens to reduce the temperature, but turbo mode can be reselected.
Low-voltage Warning: One of the indicators flashes when the battery level is critical. When the voltage level drops below a preset level, the bicycle light is programmed to step down to a lower brightness level until Low output is reached. To ensure normal use, the bicycle light will work until the battery runs out.
Mounting Instruction
Bicycle Light and bicycle mount
- Unscrew the screw of the bike mount. Fix the bike mount in the desired position on the bike handlebar and fasten the screw.
- Loosen the fine adjustment screw of the handlebar mount before clamping the mount to the bar by securely tightening the set screw.
- Slide the light into the mount until a distinct "click" is heard.
Note:
1. Adjust the direction of the light before testing the power and functions of the bicycle light.
2. Use the shims provided according to the diameter of the bicycle's handlebars:
- Thick + thin shims together: diameter 22-28mm;
- Thin only: diameter 28-32mm);
- With no shim (whenever applicable): diameter 32-35mm.
Usage and Maintenance
- Disassembling the sealed head can cause damage to the light and will void the warranty.
- The light will accumulate a lot of heat when working on Turbo mode. - Do not touch the heat dissipation fins.
- For secure transportation, the bicycle light is not fully charged before delivery. Recharge it before first use.
- Store a fully charged light in a dry, ventilated place if it will not be used for a long time. Recharge a stored light before reuse.
Size
Length 113mm
Width 32mm
Height 31mm
Weight 155g
Battery
Built-in 2600mAh Li-ion Battery
Waterproof IP66
Output Lumen Levels
50
150
350
600
150 (Flash)
Runtime
Low 36 Hours
Medium 15 Hours
High 7 Hours
Turbo 2 Hours
As an international traveller you are entitled to bring a certain amount/value of goods that are free of Customs duty and exempt Goods and Services tax (GST) into New Zealand. This is called your duty free allowance and personal goods concession. It is important to review these for any purchases you make on The Mall.
Your duty free allowance entitles you to bring into New Zealand the following quantities of alcohol products free of customs duty and GST provided you are over 17 years of age. You do need to be 18 years or over to purchase.
- Up to six bottles (4.5 litres) of wine, champagne, port or sherry or
- Up to twelve cans (4.5 litres) of beer
- And three bottles (or other containers) each containing not more than 1125ml of spirits, liqueur, or other spirituous beverages
Goods other than alcohol and tobacco, whether purchased overseas or purchased duty free in New Zealand, that have a combined total value not exceeding NZ$700 may also be brought as part of your personal goods concession.
When travelling overseas there are legal limits on the amount of duty free alcohol and other goods you can take with you. These amounts will vary depending on the country you are flying into. We always recommend you check the latest limits and exemptions.
Your order can be picked up at an Auckland Airport Collection Point. There is one in departures and one at arrivals in the international terminal. Alternatively, if you are arriving between 11pm and 6am you will be able to collect your order from our lockers. See map
Please bring your order confirmation email and your passport. If you are collecting from lockers you will have been sent an email with your access code, be sure to have this on you in order to collect your order.
If you’re departing Auckland Airport, we recommend that you come to the Auckland Airport Collection Point at least 60 minutes before your flight. If you miss your pickup time or your flight details have changed please let us know as soon as possible.
When you collect your order you will have the opportunity to inspect the items and sign for them.
If you need to return an item, our Collection Point team are there to help you. If you are collecting after hours please return the item to your locker and our team will be in touch as soon as possible. You may also like to view our Returns & refunds which provides information on how this works and outlines the individual retailer's returns and refunds policies.
After Hours Collections
If your order needs to be collected after the Auckland Airport Collection Point desk is closed, your order will be placed in the lockers next to the desk. All the details you will need to collect your order will be provided in your Order Confirmation and Ready to Collect Email.