RODE RODELink Filmmaker , Wireless Digital Camera-Mount Omni Wireless Microphone Kit
The Rode RODELink Filmmaker Kit brings vloggers, DIY videographers, and content creators a cost-effective digital wireless microphone system with simple, plug-and-record operation, clean and reliable sound, and extended battery life.
The kit features an omnidirectional lavalier microphone for hands-free speech and dialog, along with a bodypack transmitter, and a camera-mount receiver. It operates anywhere in the world in the 2.4 GHz spectrum-well away from potential TV and radio interference.
For ease of use, the transmitter and receiver are paired at the factory. Just power up and you're good to go. The system plugs into your DSLR or mirrorless camera, allowing you to capture audio for projects ranging from YouTube vlogs and wedding videos to corporate spots and interviews.
The Filmmaker Kit boasts a remarkable battery life, routinely operating for over 30 hours (and up to 50 hours in ideal environments) on two AA batteries. Up to eight systems can operate on set.
Transmitter with Lavalier Mic
Made of lightweight plastic, the bodypack transmitter clips to the talent's waist and features a locking 3.5mm connection for the lavalier, ensuring the mic doesn't detach while in use.
A 3-stage gain adjustment lets you set the input to accommodate mic levels ranging from a soft whisper to loud speech.
The transmitter features a single mute/mute lock/power button and a status-indicator LED-displaying battery life, and mute status.
Receiver with OLED Display
The equally lightweight (at 6.7 oz) receiver also features easy, one-button operation for basic controls, and a detachable shoemount with a rounded base that lets you conveniently angle the unit on top of your camera.
The included cable connects the receiver's output to the 3.5mm audio input of any DSLR or mirrorless camera. Alternatively, the VXLR 3.5mm to XLR adapter (available separately) allows you plug your system into the XLR input of a camcorder or recording device.
The receiver features a high-output level with three-stage gain adjustment, which lets you turn down the camera gain for cleaner recordings with less hiss.
Conveniently, the receiver's OLED display shows critical information for the receiver as well as the transmitter, including battery status, signal level, mute status, and channel selection for both units.
Simple and Flexible Operation
The transmitter and the receiver arrive pre-paired, and automatically seek out a clean frequency when you turn them on-saving you the hassle of scanning and syncing before a shoot.
The system uses an intuitive, single-button interface for frequently used basic functions including power, muting, and the mute lock function (which prevents the talent from muting the mic).
The mute-lock function on the transmitter can be wirelessly activated from the receiver.
Additional buttons offer more advanced controls-without elaborate menu diving-over audio levels, additional pairing, and channel selection (if you're using multiple systems).
Clean and Reliable Sound
RODELink employs Series II 2.4 GHz digital transmission, which constantly monitors and hops between frequencies to maintain a clean transmission, at a range of up to 330'.
To ensure clear communication, the system sends the audio on two separate frequencies (frequency diversity) and uses the cleanest signal.
The system transmits a strong signal at the selected frequency to overcome interference even in busy 2.4 GHz (Wi-Fi) environments. For optimal performance, users are encouraged to maintain as direct a line of sight as possible between the transmitter and receiver.
To deliver high-quality wireless audio, the system offers a resolution of 24-bit / 44.1 kHz, a wide frequency response of 35 Hz to 22 kHz, and an impressive dynamic range of 112 dB.
Note: Each RODELink system creates a wireless peer-to-peer connection allowing the transmitter and the receiver to operate as a pair. This means that the transmitter can transmit audio to only one receiver at a time. Conversely, the receiver can only receive audio from one transmitter at a time.
Other Features
The transmitter's belt clip and receiver's shoemount adapters can be swapped, allowing either component to be belt clipped, mounted on cameras and tripods, or used in an audio bag
While in operation, the system can be powered via USB with a wall power source or a portable battery
4 ms maximum latency
128-bit encryption for security
Both the transmitter and receiver run on two AA batteries
For added flexibility, the compatible TX-XLR plug-on transmitter (available separately) lets you turn any handheld or shotgun mic into a wireless microphone for man-on-street interviews or wireless booming
Designed and made in Australia
System
Wireless Transmission
Digital 2.4 GHz
Included Transmitters
1 x Bodypack with Microphone
Diversity
Frequency
Max Operating Range
330' / 100.6 m (Line of Sight)
Max Systems per Setup
8
Sample Rate/Resolution
44.1 kHz / 24-Bit
Latency
4 ms (Maximum)
Dynamic Range
112 dB
Encryption
128-Bit
Receiver
Form Factor
Camera-Mount (Bag Suitable)
Mounting Options
Belt Clip, Shoe-Mount (with Included Hardware)
Antenna
Internal
Number of Audio Channels
1
Audio I/O
1 x 1/8" / 3.5 mm TRS Female Unbalanced Output (Lockable)
Audio Output Level
0 dBV (Max)
Frequency Response
35 Hz to 22 kHz
USB/Lightning Connectivity
1 x Micro-USB (Bus Power)
Impedance
1/8" / 3.5 mm Output:
300 Ohms (Unbalanced)
Power Requirements
Battery, Bus Power (USB)
Battery Type
2 x AA (Not Included)
Approx. Battery Life
30 Hours (Alkaline)
Display & Indicators
1 x OLED (Battery Status, Channel, Mute, Peak)
Housing
Plastic
Dimensions
2.6 x 4.4 x 2" / 65 x 111 x 52 mm
Weight
6.7 oz / 190 g
Transmitter
Form Factor
Bodypack
RF Output Power
Not Specified by Manufacturer
Audio I/O
1 x 1/8" / 3.5 mm TRS Female Unbalanced Input (Lockable)
Plug-In Power
4 V
Pad
None
Muting
Programmable Mute Switch
Audio Input Level
1 V RMS (Max)
Signal Processing
None
Frequency Response
35 Hz to 22 kHz
Antenna
1 x Internal
Power Requirements
Battery, Bus Power (USB)
Battery Type
2 x AA (Not Included)
Approx. Battery Life
30 Hours (Alkaline)
USB/Lightning Connectivity
1 x Micro-USB (Bus Power)
Display & Indicators
1 x LED (Battery Status, Mute)
Housing
Plastic
Dimensions
2.6 x 4.4 x 1.6" / 65 x 111 x 40 mm
Weight
6.7 oz / 190 g
Microphone
Form Factor
Lavalier
Sound Field
Mono
Capsule
Electret Condenser
Diaphragm
0.10" / 2.54 mm
Polar Pattern
Omnidirectional
Frequency Range
60 Hz to 18 kHz
Equivalent Noise Level
25 dB A-Weighted
Maximum SPL
110 dB SPL
Impedance
3 Kilohms
Sensitivity
-33.5 dB at 1 kHz
Output Connectors
1 x 1/8" / 3.5 mm TRS Male Unbalanced (Lockable)
Length
0.47" / 12 mm
Diameter
0.18" / 4.5 mm
Weight
0.04 oz / 1 g
As an international traveller you are entitled to bring a certain amount/value of goods that are free of Customs duty and exempt Goods and Services tax (GST) into New Zealand. This is called your duty free allowance and personal goods concession. It is important to review these for any purchases you make on The Mall.
Your duty free allowance entitles you to bring into New Zealand the following quantities of alcohol products free of customs duty and GST provided you are over 17 years of age. You do need to be 18 years or over to purchase.
- Up to six bottles (4.5 litres) of wine, champagne, port or sherry or
- Up to twelve cans (4.5 litres) of beer
- And three bottles (or other containers) each containing not more than 1125ml of spirits, liqueur, or other spirituous beverages
Goods other than alcohol and tobacco, whether purchased overseas or purchased duty free in New Zealand, that have a combined total value not exceeding NZ$700 may also be brought as part of your personal goods concession.
When travelling overseas there are legal limits on the amount of duty free alcohol and other goods you can take with you. These amounts will vary depending on the country you are flying into. We always recommend you check the latest limits and exemptions.
Your order can be picked up at an Auckland Airport Collection Point. There is one in departures and one at arrivals in the international terminal. Alternatively, if you are arriving between 11pm and 6am you will be able to collect your order from our lockers. See map
Please bring your order confirmation email and your passport. If you are collecting from lockers you will have been sent an email with your access code, be sure to have this on you in order to collect your order.
If you’re departing Auckland Airport, we recommend that you come to the Auckland Airport Collection Point at least 60 minutes before your flight. If you miss your pickup time or your flight details have changed please let us know as soon as possible.
When you collect your order you will have the opportunity to inspect the items and sign for them.
If you need to return an item, our Collection Point team are there to help you. If you are collecting after hours please return the item to your locker and our team will be in touch as soon as possible. You may also like to view our Returns & refunds which provides information on how this works and outlines the individual retailer's returns and refunds policies.
After Hours Collections
If your order needs to be collected after the Auckland Airport Collection Point desk is closed, your order will be placed in the lockers next to the desk. All the details you will need to collect your order will be provided in your Order Confirmation and Ready to Collect Email.