DJI Mic 2 2-Person Compact Digital Wireless Microphone System - Recorder for Camera & Smartphone (2.4 GHz)
Content creators of all experience levels can raise the production values of their videos, interviews, and streaming with the DJI Mic 2, an easy-to-use, truly wireless digital microphone/recorder system that offers vivid audio quality while supplying all the elements needed to capture audio from your subject to a DSLR/mirrorless camera or iOS/Android smartphone. The system records clear and reliable audio at up to 820' via a miniature clip-on omnidirectional mics/transmitters, which double as backup recorders for worry-free wireless. The tiny receiver can either be mounted on a DSLR camera or plugged directly into the Lightning/USB port of a smartphone or laptop. Simply complete the initial setup and you can be ready to record quality audio in seconds.
Second-Generation Updates
The new iteration of the Mic 2 features updated transmitter units with 2.4 GHz digital wireless and Bluetooth technology. Bluetooth allows you to connect the transmitters to your DJI Mimo app via iOS or Android device. You can even connect directly to your Osmo Pocket 3 or Osmo Action 4 camera. Toggle different settings via the Mimo app like intelligent noise cancellation, which reduces environmental noise for improved vocal capture or 32-bit float audio recording.
Wearable and Portable Microphones
For a truly wireless experience, conveniently attach the transmitters to whatever you're wearing via the integrated back clips (or by using the clip magnets) without having to wire yourself or your talent.
You can also hold the transmitters in your hand and use them as handheld microphones. Use the transmitters as a lavalier mic (no need for a separate mic), or operate them as traditional bodypack transmitters by plugging external lav mics (available separately).
The built-in mics feature an omnidirectional pickup pattern that ensure reliable speech capture, even if mic placement is less than ideal; your subject's voice is captured with clarity, intelligibility, and consistency.
Two furry windscreens are provided to effectively suppress wind noise while still recording clear sound.
Enjoy 6 hours of battery life on each component for 18 hours of recording in total.
High-Quality Audio with Flexibility for Postproduction
DJI Mic 2 allows you to record high-fidelity, professional audio by accurately reproducing tone across a wide frequency range. To ensure that you are capturing a clean signal, you can monitor your sound via the receiver's 3.5mm headphone output while recording.
The Safety Track mode enables you to record a secondary audio track (in mono) as a backup with a lower volume of -6 dB (different from the main audio track), helping to safeguard your audio in case of unforeseen level spikes.
Built-In Recorder and Safety Track
The transmitters have onboard recording capabilities with 8GB of storage for up to 14 hours of 48 kHz 24-bit backup recording. This allows you to record audio directly to the transmitters as a backup in case of wireless interference and dropouts. You can also use the transmitters as standalone recorders.
Files are in 48 kHz/24-bit mono WAV format and can be transferred to your computer via the USB-C cable. Toggle 32-bit float recording via Mimo app.
Reliable and Secure Wireless with Encryption
The DJI Mic 2 is capable of recording crisp audio at distances of up to 820' using DJI's encryption technology for secure communications.
The optimized wireless transmission system ensures a stable and reliable stream of audio, even in busy areas, such as train stations, shopping malls, and offices.
The system avoids interference from TV and radio waves by operating in the 2.4 GHz frequency band, which occupies frequencies beyond those of television, radio transmissions, and UHF wireless microphone systems.
Easy to Operate
The receiver features both a built-in, expanded OLED touchscreen and onboard dial for easy configuration.
View and adjust volume, gain, and channels to find the perfect settings of your surroundings. Battery life, recording status, and wireless signal strength are also displayed.
An internal motor sends clear haptic feedback during key operations like powering on or off, internal recording, muting and unmuting, and noise cancellation activation or deactivation.
Vastly Compatible
If you want to use the DJI Mic 2 with a smartphone, just insert either the Lightning or USB-C adapter into the expansion port at the bottom of the receiver and connect it to your phone and start shooting. These adapters support stereo audio playback without needing to unplug the receiver. Use the 3.5mm TRS cable to connect the camera's 3.5mm mic connector to the receiver's 3.5mm audio-output connector and start filming on your camera. The 3.5mm adapter supports automatic power on/off in sync with the power status of your camera.
General
Polar Pattern
Omnidirectional
Frequency Response
Low Cut Off: 50 Hz - 20 kHz
Low Cut On: 150 Hz - 20 kHz
Max Sound Pressure Level (SPL)
120 dB SPL
Max Input Level (3.5 mm)
-6 dBV (THD < 0.1%)
Equivalent Noise
21 dBA
Monitor Interface Output Power
Max Output 12 mW@1 kHz, 32 O
Max Transmission Distance
250 m (FCC)
160 m (CE)
Measured in an unobstructed outdoor environment free of interference.
DJI Mic 2 Transmitter
Dimensions
46.06×30.96×21.83 mm (L×W×H)
Weight
28 g
Wireless Mode
GFSK 1 Mbps and 2 Mbps
Equivalent Isotropic Radiated Power (EIRP)
<20 dBm
Wireless Mode Operating Frequency
2.400-2.4835 GHz
Bluetooth Protoco
l BR/EDR
Bluetooth Operating Frequency
2.400-2.4835 GHz
Bluetooth Transmitter Power (EIRP)
<20 dBm
Battery Type
Li-ion
Battery Capacity
360 mAh
Battery Energy
1.39 Wh
Battery Voltage
3.87 V
Charging Temperature
5° to 45° C (41° to 113° F)
Operating Temperature
-10° to 45° C (14° to 113° F)
Charging Time
70 mins
Operating Time
6 hours
Tested when both TXs are connected to the RX without recording backup clips internally, and the RX is connected to a camera via Camera Audio Cable (3.5mm TRS).
DJI Mic 2 Receiver
Model
DMR02
Dimensions
54.20×28.36×22.49 mm (L×W×H)
Weight
28 g
Wireless Mode
GFSK 1 Mbps and 2Mbps
Equivalent Isotropic Radiated Power (EIRP)
<20 dBm
Operating Frequency
2.400-2.4835 GHz
Battery Type
Li-ion
Battery Capacity
360 mAh
Battery Energy
1.39 Wh
Battery Voltage
3.87 V
Charging Temperature
5° to 45° C (41° to 113° F)
Operating Temperature
-10° to 45° C (14° to 113° F)
Charging Time
70 mins
Operating Time
6 hours
Tested when both TXs are connected to the RX without recording backup clips internally, and the RX is connected to a camera via Camera Audio Cable (3.5mm TRS).
DJI Mic 2 Charging Case
Model
DMC02
Dimensions
116×41.5×59.72 mm (L×W×H)
Weight
200 g
Battery Type
18650 Li-ion
Battery Capacity
3250 mAh
Battery Energy
11.7 Wh
Battery Voltage
3.6 V
Charging Specification
5 V, 1.5-3 A
Charging Temperature
5° to 40° C (41° to 104° F)
Operating Temperature
5° to 45° C (41° to 113° F)
Charging Time
2 hours and 40 mins
Charging Cycles for TX and RX Approx. two cycles when charging two TXs and one RX at the same time
As an international traveller you are entitled to bring a certain amount/value of goods that are free of Customs duty and exempt Goods and Services tax (GST) into New Zealand. This is called your duty free allowance and personal goods concession. It is important to review these for any purchases you make on The Mall.
Your duty free allowance entitles you to bring into New Zealand the following quantities of alcohol products free of customs duty and GST provided you are over 17 years of age. You do need to be 18 years or over to purchase.
- Up to six bottles (4.5 litres) of wine, champagne, port or sherry or
- Up to twelve cans (4.5 litres) of beer
- And three bottles (or other containers) each containing not more than 1125ml of spirits, liqueur, or other spirituous beverages
Goods other than alcohol and tobacco, whether purchased overseas or purchased duty free in New Zealand, that have a combined total value not exceeding NZ$700 may also be brought as part of your personal goods concession.
When travelling overseas there are legal limits on the amount of duty free alcohol and other goods you can take with you. These amounts will vary depending on the country you are flying into. We always recommend you check the latest limits and exemptions.
Your order can be picked up at an Auckland Airport Collection Point. There is one in departures and one at arrivals in the international terminal. Alternatively, if you are arriving between 11pm and 6am you will be able to collect your order from our lockers. See map
Please bring your order confirmation email and your passport. If you are collecting from lockers you will have been sent an email with your access code, be sure to have this on you in order to collect your order.
If you’re departing Auckland Airport, we recommend that you come to the Auckland Airport Collection Point at least 60 minutes before your flight. If you miss your pickup time or your flight details have changed please let us know as soon as possible.
When you collect your order you will have the opportunity to inspect the items and sign for them.
If you need to return an item, our Collection Point team are there to help you. If you are collecting after hours please return the item to your locker and our team will be in touch as soon as possible. You may also like to view our Returns & refunds which provides information on how this works and outlines the individual retailer's returns and refunds policies.
After Hours Collections
If your order needs to be collected after the Auckland Airport Collection Point desk is closed, your order will be placed in the lockers next to the desk. All the details you will need to collect your order will be provided in your Order Confirmation and Ready to Collect Email.