Ubiquiti UniFi Access Gen 2 Starter Kit (UA-G2-SK) - UniFi Dream Machine Pro required
Ubiquiti UniFi Access G2 Starter Kit (UA-G2-SK)
The Ubiquiti UniFi Access G2 Starter Kit (UA-G2-SK) provides an easy entry point into the UniFi Access system, specifically designed for single-door access control. This kit includes essential components like the UniFi Access Door Hub, an Access Reader G2, and ten UniFi Access Cards, streamlining the access management process. The Access Reader G2 features a robust polycarbonate enclosure for durability.
UA-G2-SK includes:
(1) UniFi Access Door Hub
(1) Access Reader G2
(10) UniFi Access Cards
The UA-Hub-Door, a key component of the kit, offers high-speed connectivity with its 10/100/1000 Base-T networking interface and PoE++ support. It's equipped with various input and output options, making it suitable for indoor use and compliant with multiple certifications, ensuring security and reliability. The included UniFi Access Cards simplify secure access management.
UA-Hub-Door
Mechanical
Dimensions
174.9 x 126 x 32.9 mm (6.9 x 5 x 1.3")
Weight
363 g (12.8 oz)
Enclosure material
Polycarbonate
Mounting material
Polycarbonate
Hardware
Networking interface
(5) 10/100/1000 Base-T
Power method
PoE++
UL 294 Power-limited Class 2 PSU
UL 60950/62368 LPS/PS2 PSU
Max. power consumption
Without PoE output: 30W
With PoE output: 50W
PoE input
50V DC, 1A
PoE output
PoE passthrough, (4) PoE, 50V DC, total 20W
Button
(1) Factory-reset
LEDs
System: white/blue
Output relays: white
Digital input
Request to exit/request to enter/remote release/door position sensor
Dry output relay
Lock: 30V DC, 1A
Aux: 30V DC, 1A
Powered output relay
Lock: 12V DC, 1A
Aux: 12V DC, 0.33A
12V DC, 0.33A
Operating environment
Indoor use only
Operating temperature
0 to 40° C (32 to 104° F)
Operating humidity
5 to 95% noncondensing
UL 294 level
Destructive attack: Level I
Line security: Level I
Endurance: Level I
Standby power: Level I
UL 294 statement
Compliance with IEEE 802.3 (at or af) specifications was not verified as part of UL 294.
The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.
CAN/ULC-60839-11-1 Grade
Grade assignment: 1
Certifications
CE, FCC, IC, UL 294, CAN/ULC-60839-11-1
Document number, and issue date and/or revision level
UA-Hub-Door002, V01
Wiring Information
Typical installation (Shielded)
DC power input: Belden 8750 18 AWG 2 conductor (30.5 m/100 ft)
Door position switch: Belden 8750 18 AWG 2 conductor (152.5 m/500 ft)
Request to exit: Belden 8750 18 AWG 2 (152.5 m/500 ft)
Wiring gauge requirements (AWG)
Total length to device / Output load current at 12V DC
6.1 m (20 ft)
100mA: 22
250mA: 22
500mA: 22
1A: 18
15.2 m (50 ft)
100mA: 22
250mA: 22
500mA: 22
1A: 18
30.5 m (100 ft)
100mA: 22
250mA: 22
500mA: 18
1A: 18
PoE cabling requirements
The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 24 AWG (0.21 mm2) for horizontal or riser cable.
LEDs
PoE in
Steady blue: Adopted/device is ready
Steady white: Pending adoption
Blinking white/blue: Upgrading firmware
PoE out
Off: Not connected or no data link
Steady blue: Connected and data link on
UA-G2
Mechanical
Dimensions
93 x 40 x 36.5 mm (3.7 x 1.6 x 1.4")
Weight
82 g (2.9 oz)
Enclosure material
Polycarbonate, glass
Mounting
In wall, gang box
Weatherproofing
IP55
Hardware
Networking interface
(1) 10/100 MbE RJ45 port
Connectivity
BLE 4.1
Power method
PoE
Supported voltage range
48V DC
Max. power consumption
5W
ESD/EMP protection
Air: ±15kV, contact: ±8kV
Sensors
Proximity sensor
Speaker
(1) 8 ohm, 0.7W
LEDs
R/G/B/W
Button
(1) Factory-reset
NFC frequency
13.56 MHz
NFC read range
< 30 mm
NFC standards
ISO 14443A, 14443B, 15693
NFC technology
NFC Tag 1,2,3,4,5
MIFARE Classic
MIFAREPlus
MIFARE Ultralight
MIFARE DESFire
Operating temperature
-30 to 45° C (-22 to 113° F)
Operating humidity
5 to 90% noncondensing
Certifications
CE, FCC, IC
UA-Card
Mechanical
Dimensions
85.6 x 53.98 x 0.84 mm (3.37 x 2.13 x 0.03")
Weight
5 g (0.18 oz)
Format
ISO 7810 ID-1
NFC frequency
13.56 MHz
NFC technology
ISO/IEC 14443 Type A
MIFARE DESFire
UniFi Access Proprietary Security Protocol
As an international traveller you are entitled to bring a certain amount/value of goods that are free of Customs duty and exempt Goods and Services tax (GST) into New Zealand. This is called your duty free allowance and personal goods concession. It is important to review these for any purchases you make on The Mall.
Your duty free allowance entitles you to bring into New Zealand the following quantities of alcohol products free of customs duty and GST provided you are over 17 years of age. You do need to be 18 years or over to purchase.
- Up to six bottles (4.5 litres) of wine, champagne, port or sherry or
- Up to twelve cans (4.5 litres) of beer
- And three bottles (or other containers) each containing not more than 1125ml of spirits, liqueur, or other spirituous beverages
Goods other than alcohol and tobacco, whether purchased overseas or purchased duty free in New Zealand, that have a combined total value not exceeding NZ$700 may also be brought as part of your personal goods concession.
When travelling overseas there are legal limits on the amount of duty free alcohol and other goods you can take with you. These amounts will vary depending on the country you are flying into. We always recommend you check the latest limits and exemptions.
Your order can be picked up at an Auckland Airport Collection Point. There is one in departures and one at arrivals in the international terminal. Alternatively, if you are arriving between 11pm and 6am you will be able to collect your order from our lockers. See map
Please bring your order confirmation email and your passport. If you are collecting from lockers you will have been sent an email with your access code, be sure to have this on you in order to collect your order.
If you’re departing Auckland Airport, we recommend that you come to the Auckland Airport Collection Point at least 60 minutes before your flight. If you miss your pickup time or your flight details have changed please let us know as soon as possible.
When you collect your order you will have the opportunity to inspect the items and sign for them.
If you need to return an item, our Collection Point team are there to help you. If you are collecting after hours please return the item to your locker and our team will be in touch as soon as possible. You may also like to view our Returns & refunds which provides information on how this works and outlines the individual retailer's returns and refunds policies.
After Hours Collections
If your order needs to be collected after the Auckland Airport Collection Point desk is closed, your order will be placed in the lockers next to the desk. All the details you will need to collect your order will be provided in your Order Confirmation and Ready to Collect Email.