Teltonika TSW212 10-Port Managed Ethernet Switch 8x GigE 2x SFP
TSW212 is an L2 Teltonika Networks managed switch with additional L3 features, like DHCPv6 client support and static IPv6 routing for greater network management. This switch supports multiple industrial protocols, including EtherNet/IP, PROFINET, and MRP, and has 8 Gigabit Ethernet ports and 2 SFP ports to ensure robust long-range fibre optic communication. Encased in rugged aluminum housing, the TSW212 excels in withstanding extreme temperatures and resisting severe vibrations - all with effortless installation thanks to an integrated DIN rail mount. - L2 with additional L3 features for advanced management capabilities- Supports Profinet for automated data processing alongside other protocols, like EtherNet IP and MRP- 8 x Gigabit Ethernet ports and 2 x SFP ports for fibre optic communication- Teltonika Networks OS for switches, intuitively designed for infinite configurations- Configure via RMS
- RAM
- 128MB, DDR3
- Flash storage
- 16MB serial flash
- Powering options
- 2-pin industrial DC power socket, 7 - 57 VDC
- Power consumption
- Idle: < 2.5 W / Max: 6 W
- Status LEDs
- 1 x Power LED, 1 x Aux LED, 16 x ETH status LEDs, 2 x SFP status LEDs
- Ethernet
- 8 x RJ45 ports, 10/100/1000 Mbps
- SFP
- 2 x SFP ports
- Ingress protection rating
- IP30
- Operating temperature
- -40°C to 75°C
- Dimensions (W x H x D)
- 132 x 44.2 x 122.2 mm
- Weight
- 615 g
- Mounting options
- Integrated DIN rail bracket, wall mount, flat surface (additional kit needed)
- Bandwidth (Non-blocking)
- 20 Gbps
- Packet buffer
- 512 KB
- MAC address table size
- 8K entries
- Jumbo frame support
- 10000 bytes
- Supported services
- EtherNet/IP, PROFINET (class B), SNMP V2, V3, LLDP, Network Management
- MRP
- MRP client role, MRP manager role
- L2 features
- Loop protection, Forwarding table, VLAN, STP/RSTP
- DHCP
- DHCP server, DHCP client, DHCP static leases capable of using MAC with wildcards
- Port Settings
- Enable/disable, link speed control, port isolation, EEE (802.3az) management, Port Mirroring
- L3 Features
- Static IPv4 routing, static IPv6 routing, DHCPv6 client, static IPv6 address
- QOS
- Port priority, DSCP priority, 802.1p priority, TOS
- Scheduling method
- SP/WFQ/WRR
- Bandwidth control
- Rate limiting, storm control
As an international traveller you are entitled to bring a certain amount/value of goods that are free of Customs duty and exempt Goods and Services tax (GST) into New Zealand. This is called your duty free allowance and personal goods concession. It is important to review these for any purchases you make on The Mall.
Your duty free allowance entitles you to bring into New Zealand the following quantities of alcohol products free of customs duty and GST provided you are over 17 years of age. You do need to be 18 years or over to purchase.
- Up to six bottles (4.5 litres) of wine, champagne, port or sherry or
- Up to twelve cans (4.5 litres) of beer
- And three bottles (or other containers) each containing not more than 1125ml of spirits, liqueur, or other spirituous beverages
Goods other than alcohol and tobacco, whether purchased overseas or purchased duty free in New Zealand, that have a combined total value not exceeding NZ$700 may also be brought as part of your personal goods concession.
When travelling overseas there are legal limits on the amount of duty free alcohol and other goods you can take with you. These amounts will vary depending on the country you are flying into. We always recommend you check the latest limits and exemptions.
Your order can be picked up at an Auckland Airport Collection Point. There is one in departures and one at arrivals in the international terminal. Alternatively, if you are arriving between 11pm and 6am you will be able to collect your order from our lockers. See map
Please bring your order confirmation email and your passport. If you are collecting from lockers you will have been sent an email with your access code, be sure to have this on you in order to collect your order.
If you’re departing Auckland Airport, we recommend that you come to the Auckland Airport Collection Point at least 60 minutes before your flight. If you miss your pickup time or your flight details have changed please let us know as soon as possible.
When you collect your order you will have the opportunity to inspect the items and sign for them.
If you need to return an item, our Collection Point team are there to help you. If you are collecting after hours please return the item to your locker and our team will be in touch as soon as possible. You may also like to view our Returns & refunds which provides information on how this works and outlines the individual retailer's returns and refunds policies.
After Hours Collections
If your order needs to be collected after the Auckland Airport Collection Point desk is closed, your order will be placed in the lockers next to the desk. All the details you will need to collect your order will be provided in your Order Confirmation and Ready to Collect Email.