be quiet Dark Power Pro 13 Titanium 1600W 80 Plus ATX 3.0 Power Supply
This power supply uses a C19 power connector socket instead of the standard C13 socket. Please see CABRKP20012 for a compatible power cable. DARK POWER PRO 13 1600W - CUTTING EDGE TECHNOLOGIES AND PERFORMANCE The be quiet! Dark Power Pro 13 1600W offers 80 PLUS® Titanium efficiency, world-class performance and ATX 3.0 compliance for next-gen GPU compatibility. - 80 PLUS Titanium efficiency (up to 94.5%) - ATX 3.0 PSU with full support for PCIe 5.0 GPUs and GPUs with 6+2 pin connectors- Handles massive power excursions- Fully digital control and Active Rectifier + full bridge LLC technology for unmatched signal stability - Improved and patented frameless Silent Wings fan for virtually inaudible operation at ordinary loads- Overclocking key switches between six 12V rails and one massive 12V rail- Aluminum case and modular individually sleeved cables for magnificent appearance 80 PLUS® TITANIUM CERTIFIED - The highest efficiency certificate available Dark Power Pro 13 1600W is certified with 80 PLUS Titanium and a money-saving energy efficiency rating of up to 94.5%. This provides lots of benefits for your high-end system, including less power consumption and an overall cooler and quieter operation. The standby drain is below 0.1 watts.
FUTURE-PROOF YOUR SYSTEM - Fulfills all ATX 3.0 specifications Dark Power Pro 13 1600W is an ATX 3.0 PSU and comes with both native integration of the two 12VHPWR connectors for next-generation PCIe 5.0 graphics cards, and 6 PCIe 6+2-pin connectors for support of current-gen GPUs. This makes the PSU extremely versatile and the perfect choice for present high-end systems and the ones to come.
THE NEW STANDARD OF POWER - For massive transient loads Dark Power Pro 13 offers 1600W of continuous power with 6 independent 12V rails. Even if the graphics card demands excessive power for a short time: Dark Power Pro 13 1600W handles power excursions up to double its rated power with ease. This ensures reliable operation with the next generation of processors and graphics cards.
STATE-OF-THE-ART DIGITAL TECHNOLOGY - Rock-steady signal stability and efficiency Experience the most technologically advanced power supply be quiet! has ever built! Using an advanced digital full bridge LLC technology results in higher efficiency, better regulation and lower ripple noise for an incomparably stable operation.
FRAMELESS SILENT WINGS FAN - Patented fan technology for virtually inaudible operation The improved tripod-mounted be quiet! Silent Wings fan enables maximum airflow and a virtually inaudible operation. This is thanks to its unique, airflow-optimized fan blade design along with an advanced fluid-dynamic bearing. A 6-pole fan motor ultimately makes for less vibration, super-long life and minimal power consumption.
INNOVATIVE COOLING CONCEPT - For a longer lifespan The split fan inlet of the Dark Power Pro 13 1600W is a specially shaped funnel that increases airflow while reducing unwanted turbulence. The wire-free design inside allows the cool air to reach all components flawlessly which ultimately leads to a longer lifespan.
READY FOR EXTREME OVERCLOCKING - Pushing the performance of your PSU to the max Dark Power Pro 13 1600W is particularly suitable for liquid nitrogen or helium overclocking, thanks to its state-of-the-art digital regulation. The overclocking key empowers you to manually switch between the default six 12V-rail mode and the alternative massive single-rail operation.
JAPANESE 105°C CAPACITORS - A testament to high quality Only the best components are used in Dark Power Pro 13 1600W. That is why this PSU features exclusively high-quality Japanese capacitors. They are rated at 105°C for stability, reliability, and a long operating life.
HIGHEST CONVENIENCE - Modular cables for maximum utility Individually sleeved cables of up to 120cm and cable combs simplify component installation and reduce annoying clutter. This results in increased airflow and improved cooling - even in the largest PC cases.
MAGNIFICENT APPEARANCE - No compromises Dark Power Pro 13 1600W not only captivates with its inner values. An extraordinary aluminum case and individually sleeved cables emphasize the highest standards of Dark Power Pro 13 1600W also on the outside.
- Model
- Dark Power Pro 13 1600W
- Continuous power (W)
- 1600
- Peak power (W)
- 1700
- Form factor
- Version 3.0
- Form factor EPS 12V
- Version 2.92
- Topology
- Full bridge + LLC + SR + DC/DC
- Digitally controlled
- Yes
- Voltage (Vac)
- 115 - 240
- Frequency (Hz)
- 50 - 60
- Input current (A)
- 15 / 9
- Power factor at 100% load
- >0.99
- Modern standby
- Yes
- Power consumption in standby (W)
- <0.06
- Average life time (h / 25°C)
- >100,000
- Operating temperature up to (°C)
- 50
- 80 PLUS certification
- Titanium
- Efficiency (%) at 230V, 2% load
- 73.7
- Efficiency (%) at 230V, 10% load
- 92.6
- Efficiency (%) at 230V, 20% load
- 94.2
- Efficiency (%) at 230V, 50% load
- 94.5
- Efficiency (%) at 230V, 100% load
- 92.2
- Fan
- Silent Wings
- Fan size (mm)
- 135
- Bearing technology
- FDB
- Motor technology
- 6-pole fan motor
- Max. fan speed (rpm)
- 2600
- dB(A) at 10% load
- 9.5
- dB(A) at 20% load
- 9.6
- dB(A) at 50% load
- 9.8
- dB(A) at 100% load
- 31.1
- Multi-rail operation (12V rails)
- 6
- 12V single rail operation
- Yes
- Overclocking key
- Yes
- +3.3V (A)
- 25
- +5V (A)
- 25
- +12V1 (A)
- 40
- +12V2 (A)
- 40
- +12V3 (A)
- 45
- +12V4 (A)
- 45
- +12V5 (A)
- 55
- +12V6 (A)
- 55
- -12V (A)
- 0.5
- +5Vsb (A)
- 3.5
- Max. combined power 12V (W)
- 1600
- Max. combined power 12VHPWR (W)
- 1000
- Max. combined power 3.3V + 5V (W)
- 150
- Hold-up time at 100% load (ms)
- 18
- Power good signal (ms)
- 100 - 150
- Modular cables
- Yes
- Sleeved cables
- Yes
- Flat cables
- -
- Maximum cable length (cm)
- 105
- Cable length to motherboard (cm)
- 60
- No. of cables
- 16
- ATX-Motherboard (20+4-pin)
- 1
- P4+4 (CPU)
- 1
- P8 (CPU)
- 1
- P4 (CPU)
- -
- 12VHPWR cables
- 2
- PCI-e 6+2-pin (GPU)
- 6
- PCI-e 6-pin (GPU)
- -
- SATA
- 16
- PATA
- 5
- FDD (Floppy)
- -
- OTP (over temperature protection)
- Yes
- OCP (over current protection)
- Yes
- OPP (over power protection)
- Yes
- SCP (short circuit protection)
- Yes
- OVP (over Voltage protection)
- Yes
- UVP (under Voltage protection)
- Yes
- SIP (Surge & Inrush Protection)
- Yes
- BSMI
- Yes
- CB
- Yes
- CCC
- Yes
- CE
- Yes
- cRUus
- -
- cTUVus
- Yes
- CU
- Yes
- FCC
- Yes
- RCM
- Yes
- TÜV
- Yes
- UKCA
- Yes
- Energy Star
- 8.0
- ErP
- Yes
- WEEE
- Yes
- RoHS
- Yes
- Triman
- Yes
- Thumb screws
- Yes
- Screws
- Yes
- Cable ties
- Yes
- Velcro cable ties
- Yes
- User manual languages
- CN, DE, EN, ES, FR, JP, PL, RU, TW, KR
- OCK slot bracket with switch / OCK jumper
- Yes
- SFX-to-ATX adapter bracket
- -
- Dimensions without cable (L x W x H), (mm)
- 200 x 150 x 86
- Weight (kg)
- 2.44
- Color
- Black
As an international traveller you are entitled to bring a certain amount/value of goods that are free of Customs duty and exempt Goods and Services tax (GST) into New Zealand. This is called your duty free allowance and personal goods concession. It is important to review these for any purchases you make on The Mall.
Your duty free allowance entitles you to bring into New Zealand the following quantities of alcohol products free of customs duty and GST provided you are over 17 years of age. You do need to be 18 years or over to purchase.
- Up to six bottles (4.5 litres) of wine, champagne, port or sherry or
- Up to twelve cans (4.5 litres) of beer
- And three bottles (or other containers) each containing not more than 1125ml of spirits, liqueur, or other spirituous beverages
Goods other than alcohol and tobacco, whether purchased overseas or purchased duty free in New Zealand, that have a combined total value not exceeding NZ$700 may also be brought as part of your personal goods concession.
When travelling overseas there are legal limits on the amount of duty free alcohol and other goods you can take with you. These amounts will vary depending on the country you are flying into. We always recommend you check the latest limits and exemptions.
Your order can be picked up at an Auckland Airport Collection Point. There is one in departures and one at arrivals in the international terminal. Alternatively, if you are arriving between 11pm and 6am you will be able to collect your order from our lockers. See map
Please bring your order confirmation email and your passport. If you are collecting from lockers you will have been sent an email with your access code, be sure to have this on you in order to collect your order.
If you’re departing Auckland Airport, we recommend that you come to the Auckland Airport Collection Point at least 60 minutes before your flight. If you miss your pickup time or your flight details have changed please let us know as soon as possible.
When you collect your order you will have the opportunity to inspect the items and sign for them.
If you need to return an item, our Collection Point team are there to help you. If you are collecting after hours please return the item to your locker and our team will be in touch as soon as possible. You may also like to view our Returns & refunds which provides information on how this works and outlines the individual retailer's returns and refunds policies.
After Hours Collections
If your order needs to be collected after the Auckland Airport Collection Point desk is closed, your order will be placed in the lockers next to the desk. All the details you will need to collect your order will be provided in your Order Confirmation and Ready to Collect Email.