Teltonika TSW200 8 Port Unmanaged Industrial Gigabit PoE+ Switch
TSW200 - INDUSTRIAL UNMANAGED POE+ SWITCH
POE+
8x PoE ports with 802.3af and 802.3at support
SFP
2 x SFP ports for long-range Fiber-optic communication
ETHERNET
8 x Gigabit Ethernet with speeds up to 1000 Mbps
POWER BUDGET
Total power budget at PSE up to 240 W
DURABILITY
Rugged aluminium housing
MOUNTING
DIN rail and surface mounting options
MEET THE TSW200
TSW200 is industrial unmanaged switch from Teltonika Networks.
TSW200 is equipped with 2 SFP ports for long-range Fiber-optic communication and 8 Gigabit Ethernet ports which support IEEE802.3af and IEE802.3at Power-over-Ethernet standards.
Classified as power source equipment (PSE), it enables centralization of the power supply, providing up to 30 watts per port and reducing the effort for installing power. It has 10/100/1000 Mbps Ethernet ports to provide an economical high-bandwidth solution for your industrial Ethernet network.
This rugged unmanaged industrial switch is ideal for professional high bandwidth applications where it is necessary to provide both: reliable data connection and power supply.
ETHERNET
LAN
8 x LAN ports, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
Fiber
2 x SFP ports
POE
PoE ports
Port 1 - 8
PoE standards
802.3af and 802.3at
PoE Max Power per Port (at PSE)
30 W
Total PoE Power Budget (at PSE)
240 W
PERFORMANCE SPECIFICATIONS
Bandwidth (Non-blocking)
20 Gbps
Packet buffer
128 KB
MAC address table size
2K entries
Jumbo frame support
9216 bytes
POWER
Connector
2 pin industrial DC power socket
Input voltage range
7-57 VDC
Input voltage range for PoE
44-57 VDC
Power consumption (idle/max no PoE/max)
1,81 W/5.5 W/245.5 W
PHYSICAL INTERFACES (PORTS, LEDS)
Ethernet
8 x RJ45 ports, 10/100/1000 Mbps
Fiber
2 x SFP ports
Status LED’s
1 x Power LED, 16 x LAN status LED’s 2 x SFP status LED’s
Power
1 x 2 pin industrial DC power socket
Ground
1 x Grounding screw
PHYSICAL SPECIFICATION
Casing material
Full aluminum housing
Dimensions (W x H x D)
132 x 44.2 x 95.1 mm
Weight
456 g
Mounting
DIN rail or wall mounting (additional kit needed), flat surface placement
OPERATING ENVIRONMENT
Operating temperature
-40 °C to +75 °C
Operating humidity
10 % to 90 % non condensing
Ingress Protection Rating
IP30
As an international traveller you are entitled to bring a certain amount/value of goods that are free of Customs duty and exempt Goods and Services tax (GST) into New Zealand. This is called your duty free allowance and personal goods concession. It is important to review these for any purchases you make on The Mall.
Your duty free allowance entitles you to bring into New Zealand the following quantities of alcohol products free of customs duty and GST provided you are over 17 years of age. You do need to be 18 years or over to purchase.
- Up to six bottles (4.5 litres) of wine, champagne, port or sherry or
- Up to twelve cans (4.5 litres) of beer
- And three bottles (or other containers) each containing not more than 1125ml of spirits, liqueur, or other spirituous beverages
Goods other than alcohol and tobacco, whether purchased overseas or purchased duty free in New Zealand, that have a combined total value not exceeding NZ$700 may also be brought as part of your personal goods concession.
When travelling overseas there are legal limits on the amount of duty free alcohol and other goods you can take with you. These amounts will vary depending on the country you are flying into. We always recommend you check the latest limits and exemptions.
Your order can be picked up at an Auckland Airport Collection Point. There is one in departures and one at arrivals in the international terminal. Alternatively, if you are arriving between 11pm and 6am you will be able to collect your order from our lockers. See map
Please bring your order confirmation email and your passport. If you are collecting from lockers you will have been sent an email with your access code, be sure to have this on you in order to collect your order.
If you’re departing Auckland Airport, we recommend that you come to the Auckland Airport Collection Point at least 60 minutes before your flight. If you miss your pickup time or your flight details have changed please let us know as soon as possible.
When you collect your order you will have the opportunity to inspect the items and sign for them.
If you need to return an item, our Collection Point team are there to help you. If you are collecting after hours please return the item to your locker and our team will be in touch as soon as possible. You may also like to view our Returns & refunds which provides information on how this works and outlines the individual retailer's returns and refunds policies.
After Hours Collections
If your order needs to be collected after the Auckland Airport Collection Point desk is closed, your order will be placed in the lockers next to the desk. All the details you will need to collect your order will be provided in your Order Confirmation and Ready to Collect Email.