Makeblock mBot2 - STEM S.T.E.M. Educational Robot WiFi + Bluetooth
With a PBL-based design, mBot2 blends metal parts, powerful hardware, block-based coding and Python coding into one single robot. It features a brand new AI-powered programmable control board, high-precision encoder motors and a newly-designed sensor system. Students learn more about computer &; sicence, IoT, AI, block-based coding and Python as they are designing and assembling their robots. The mBot2 kit is designed for teachers and students of upper elementary grades and high schools to teach and learn coding, science &; tech and robotics. mBot2 is ready to use right out of the box thanks to its straightforward design. And it has great extension capabilities so it can connect to extension modules and metal parts to fit into different educational settings. CyberPi integrates a full color display, speaker, microphone, light sensor, gyroscope, LED strips and more into one device; the in-built Wi-Fi + Bluetooth module allows for connection to the internet so it's empowered with some great AI and IoT functionalities, such as speech recognition, voice synthesis, account cloud broadcast, LAN broadcast and uploading data to Google Sheet over the internet. mBot2 Shield features an in-built rechargeable li-ion battery (2500mAh), two ports for encoder motors, two ports for dc motors and four ports for servos. Some of the servo ports can connect to LED strips, Arduino analog/digital sensors. mBot2 is thusly fully prepared for students and teachers who may have special needs for motor drivers in terms of amount and type. The USB Type-C Cable connects CyberPi to the software for coding or to the shield for providing power. Ultrasonic Sensor 2 owns 8 dazzling ambient lights. So it can convey more subtle emotions at the same time while measuring distance precisely. Its fully injection-molded casing provides better protection for the module. Quad RGB Sensor can detect lines and colors at the same time. And its quad channel design makes precise detection of intersections possible. Its ambient lights help reduce the false identification rate. The fully injection-molded casing provides better protection for the module. 180 Optical Encoder Motor comes with 1.5Kg cm torque, a speed of 200RPM and detection accuracy of 1°, delivering stable mechanical power to the robot. Software:
- mBlock 5: One-stop coding platform tailored to coding education, trusted by 15 million educators, and learners. Part list: 1 x CyberPi1 x mBot2 Shield1 x USB Cable (type-C)1 x Ultrasonic Sensor21 x Chassis1 x Quad RGB Sensor2 x Encoder Motor2 x Motor Cable2 x Wheel Hub4 x M2.5*12mm Screw2 x Slick Tyre1 x Mini Wheel1 x Screwdriver1 x Line-following Track Map2 x mBuild Cable (10cm)1 x mBuild Cable (20cm)6 x M4*25mm Screw6 x M4*14mm Screw6 x M4*8mm Screw Resources:
- Introduction
- Cases
- Notes
- specially designed for AI and IoT education, and supports Python for better educational experience
- Processor Performance
- 240MHz
- ROM
- 448KB
- SRAM
- 520KB
- Processor Core
- dual-core Xtensa 32-bit LX6
- SPI Flash
- 8MB
- Multithreading
- support
- Number of Programs
- up to 8
- Python
- support Live and Upload modes
- Communication
- Bluetooth +WiFi
- Onboard Sensors
- light sensor, microphone (recordable, with sound-sensor-like functionality), gyroscope, accelerometer
- Onboard Output
- 1.44-inch full color display
- Notes
- Based on the master control, with rechargeable li-ion battery
- Battery Capacity
- 2500mAh
- Discharge Rage
- 3C
- Power Rating
- 27.75W
- Number of Encoder Motors Ports
- 2
- Number of DC Motors Ports
- 2
- Number of Servo Ports
- 4
- Number of LED Strip Compatible Ports
- 2 (share port with the servo port)
- Number of Arduino Compatible Ports
- 2 (share port with the servo port)
- Number of Electronic Extension Modules Supported
- no limit, recommended for up to 10
- Notes
- Based on the master control, with rechargeable li-ion battery
- Casing
- plastic
- In-built Chip
- yes
- Number of Ambient Lights
- 8
- Notes
- Quad RGB Sensor uses visible lights for fill lights, which significantly enhances its anti-interference ability to ambient light and enables color recognition while detecting lines. The ambient light calibration function also reduces the interference of ambient light on its line detection performance.
- Casing
- plastic
- Number of Line-Following Sensors
- 4
- Number of Color Sensors
- 4 (embedded in line-following sensors)
- Number of Light Sensors
- 4 (embedded in line-following sensors)
- Fill Light
- visible light as the fill light
- Has Ambient Light Calibration
- yes
As an international traveller you are entitled to bring a certain amount/value of goods that are free of Customs duty and exempt Goods and Services tax (GST) into New Zealand. This is called your duty free allowance and personal goods concession. It is important to review these for any purchases you make on The Mall.
Your duty free allowance entitles you to bring into New Zealand the following quantities of alcohol products free of customs duty and GST provided you are over 17 years of age. You do need to be 18 years or over to purchase.
- Up to six bottles (4.5 litres) of wine, champagne, port or sherry or
- Up to twelve cans (4.5 litres) of beer
- And three bottles (or other containers) each containing not more than 1125ml of spirits, liqueur, or other spirituous beverages
Goods other than alcohol and tobacco, whether purchased overseas or purchased duty free in New Zealand, that have a combined total value not exceeding NZ$700 may also be brought as part of your personal goods concession.
When travelling overseas there are legal limits on the amount of duty free alcohol and other goods you can take with you. These amounts will vary depending on the country you are flying into. We always recommend you check the latest limits and exemptions.
Your order can be picked up at an Auckland Airport Collection Point. There is one in departures and one at arrivals in the international terminal. Alternatively, if you are arriving between 11pm and 6am you will be able to collect your order from our lockers. See map
Please bring your order confirmation email and your passport. If you are collecting from lockers you will have been sent an email with your access code, be sure to have this on you in order to collect your order.
If you’re departing Auckland Airport, we recommend that you come to the Auckland Airport Collection Point at least 60 minutes before your flight. If you miss your pickup time or your flight details have changed please let us know as soon as possible.
When you collect your order you will have the opportunity to inspect the items and sign for them.
If you need to return an item, our Collection Point team are there to help you. If you are collecting after hours please return the item to your locker and our team will be in touch as soon as possible. You may also like to view our Returns & refunds which provides information on how this works and outlines the individual retailer's returns and refunds policies.
After Hours Collections
If your order needs to be collected after the Auckland Airport Collection Point desk is closed, your order will be placed in the lockers next to the desk. All the details you will need to collect your order will be provided in your Order Confirmation and Ready to Collect Email.