K7 - A new baseline for balanced desktop sound
Truly balanced DAC/Amp | THX AAA 788+ amp technology | Dual AK4493SEQ DACs
Multiple intelligent protection systems Two levels of hardware gain
RGB status indicators | 3 output modes
Truly balanced decoding and amplification
The K7 has a six-stage audio circuit with truly balanced analog and digital sections – which helps to reduce crosstalk and reproduce music to a great extent, allowing you to better enjoy the purity of your music.
Democratized high-quality balanced amplification - Couldn’t sound better
Using the same THX AAA 788+ amplifiers as the K9 Pro, the K7 is capable of outputting 560mW into a 300O load at 1% distortion, and 2000mW into a 32O load at 1% distortion. This ensures both low and high impedance headphones are powered with aplomb, and most importantly lets you experience musicality that’s sure to tug at your heartstrings.
Dual AK4493SEQ - Rich and delicate overall sound
The left and right channels are each equipped with an efficient high-performance AK4493SEQ. With this DAC’s pleasant timbre, its rich and delicate overall sound will let you rediscover your music all over again.
Robust decoding capabilities - Take a trip around the music world
The XMOS XUF208 decoder chip uses dual clock management to handle various music formats with ease, allowing you to easily listen to many audio formats.
RGB indicator lights - For a colorful entrance
The RGB indicator lights are capable of displaying single colors as well as mixed colors, with a unique light flow effect during power-on/off or input switching. Dazzling and vivid light effects give your desk some much needed spice.
Multiple intelligent protection systems - Worry-free listening
Overheating, overload, DC protection systems ensure that the K7 always operates at its best, so you can always enjoy a wonderful listening experience in multiple scenarios.
Consistent inside and out - For pure clean listening
The K7 features a power design consisting of multiple independent stages, with a voltage of each stage being regulated by low-noise LDOs. Feeding this power design is an external 12V switching power supply. All in all, the K7’s power design is designed to supply plentiful, clean power for an extraordinary listening experience.
Numerous exciting possibilities - All within reach
Variety of inputs and outputs All in one place The K7 contains USB, optical, coaxial, and RCA inputs. Outputs are 6.35mm single-ended and 4.4mm balanced for pleasant listening no matter the headphones.
Input switching - With just one click
One key controls switching between the 4 different inputs, with a flowing light effect to indicate when the input has switched and is ready.
3 different outputs - With just one touch
One touch of a handy key allows you to switch between 3 output modes (for use with headphones, with speakers, or use as a DAC).
Two gain levels - Find a comfortable volume
The high and low hardware gain levels allow you to easily adjust the K7 to handle headphones of various impedances and sensitivities for a rich and consistent listening experience.
Quality construction - For an elegant air
The K7 features an all-aluminum alloy construction, carefully finished with CNC and other processes. Its elegant black color is perfectly complemented by the gold accents of THX and Hi-Res Audio badges topped with a splash of color from the RGB lights for a thoroughly luxurious appearance.
Precisely tuned volume - For truly moving experience
Thanks to ADC curve reconstruction, experience a smooth 112 steps of adjustable volume free of channel imbalances and noise – ensuring that every note is faithfully reproduced.
Lightweight all-in-one - Simple and elegant
The K7 features a petite design that only measures 55mm thick and with a footprint of less than 1/3 of an A4-sized sheet of paper – allowing it to fit perfectly on modern desks.
A jack of all trades - Capable under any scenario
Connecting to desktops or laptops via USB
Connecting to smartphones via USB-B to Type-C cable
Connecting to desktop DACs
Connecting to external amplifiers or active speakers
Abundant Accessories
Power cable x1
Power adapter x1
USB cable x1
Quick start guide x1
Warranty card x1
DAC
AK4493SEQ*2
Decoder
XMOS XUF 208
Amplifier
Dual THX AAA 788+
Outputs
6.35mm/4.4mm
Inputs
USB/OPT/COAX/RCA
Output power 1
>=2000mW (32O, balanced/THD+N<1%)
Output power 2
>=1220mW (32O, single-ended/THD+N<1%)
Signal-to-noise ratio
>=120dB ( A-weighted, UAC)
Noise floor
PO<4.4µV (A-weighted, UAC); BAL<7.7µV (A-weighted, UAC)
Output impedance
<1O (32O load)
Weight
About 610g
Dimensions
About 120mm×168mm×55mm
As an international traveller you are entitled to bring a certain amount/value of goods that are free of Customs duty and exempt Goods and Services tax (GST) into New Zealand. This is called your duty free allowance and personal goods concession. It is important to review these for any purchases you make on The Mall.
Your duty free allowance entitles you to bring into New Zealand the following quantities of alcohol products free of customs duty and GST provided you are over 17 years of age. You do need to be 18 years or over to purchase.
- Up to six bottles (4.5 litres) of wine, champagne, port or sherry or
- Up to twelve cans (4.5 litres) of beer
- And three bottles (or other containers) each containing not more than 1125ml of spirits, liqueur, or other spirituous beverages
Goods other than alcohol and tobacco, whether purchased overseas or purchased duty free in New Zealand, that have a combined total value not exceeding NZ$700 may also be brought as part of your personal goods concession.
When travelling overseas there are legal limits on the amount of duty free alcohol and other goods you can take with you. These amounts will vary depending on the country you are flying into. We always recommend you check the latest limits and exemptions.
Your order can be picked up at an Auckland Airport Collection Point. There is one in departures and one at arrivals in the international terminal. Alternatively, if you are arriving between 11pm and 6am you will be able to collect your order from our lockers. See map
Please bring your order confirmation email and your passport. If you are collecting from lockers you will have been sent an email with your access code, be sure to have this on you in order to collect your order.
If you’re departing Auckland Airport, we recommend that you come to the Auckland Airport Collection Point at least 60 minutes before your flight. If you miss your pickup time or your flight details have changed please let us know as soon as possible.
When you collect your order you will have the opportunity to inspect the items and sign for them.
If you need to return an item, our Collection Point team are there to help you. If you are collecting after hours please return the item to your locker and our team will be in touch as soon as possible. You may also like to view our Returns & refunds which provides information on how this works and outlines the individual retailer's returns and refunds policies.
After Hours Collections
If your order needs to be collected after the Auckland Airport Collection Point desk is closed, your order will be placed in the lockers next to the desk. All the details you will need to collect your order will be provided in your Order Confirmation and Ready to Collect Email.