- Made with reinforced glass to protect your X5 lenses from daily wear and tear.
- Customized to maximize light transparency and picture quality.
- X5 automatically activates Lens Guard Mode.
- Simply twist to install and remove.
Standard Lens Guards
Convenient protection without compromising on capture quality.
Strong and scratch-resistant
Reinforced 7H* glass protects your lenses from daily wear and tear.
*Note: Glass strength tested in lab conditions.
High-definition optics
Customized coating process ensures complete image clarity.
Plug and play
X5 automatically enters Lens Guard Mode when the lenses are applied to streamline your shooting.
Shoot seamlessly
The Standard Lens Guards match X5's shooting angle to prevent stitching lines in 360° panoramas.
Twist on, twist off.
Simple rotating design lets you lock in and switch out your lenses easily.
*Avoid using the Lens Guards in wet conditions as their seal is not waterproof.
How to Use
1. Align the notch on the Lens Guard with the lower right slot of the lens. Then, rotate the Lens Guard clockwise until the notch is aligned with the microphone. Repeat with the second lens.
2. Confirm Installation
After the Lens Guard is installed on the screen side, an icon will appear in the camera's status bar, followed by a popup message. Tap the prompt to confirm.
3. Remove the Lens Guards
Hold down the edge of the base of the Lens Guard and rotate counterclockwise to remove. After removal, the icon in the status bar will disappear.
Notes
1. Do not apply too much pressure when installing or removing a Lens Guard, as this may damage or change the shape of the base.
2. Ensure both Lens Guards are securely installed before using the camera. The notch of each Lens Guard must be aligned with the camera's microphone. If the notch isn't aligned, the camera will not be able to recognize the Lens Guard.
3. Only once the screen-side Lens Guard is installed will the icon display on the camera's status bar and the popup message appear.
4. If you install the Lens Guards while the camera is recording, saving, updating or formatting, the camera will display the status icon but not the prompt.
5. The Lens Guards may slightly affect the camera's stitching ability. To get the best results, point one lens at your subject.
6. Dirty or worn Lens Guards may affect overall image quality.
7. Avoid using the Lens Guards in wet conditions as their seal is not waterproof.
8. If the Lens Guards do get wet, dry each lens thoroughly with a soft cloth to avoid fogging.
9. The Lens Guards contain magnets. Keep them away from pacemakers and other devices affected by magnetic interference.
Material
Glass, plastic, neodymium magnet
Weight
4.2g (0.2oz)
Size
35.7x35.2x11.65mm (1.4x1.4x0.5in)
Compatibility
Insta360 X5
In the Box
2x Standard Lens Guards
1x Lens Cloth
As an international traveller you are entitled to bring a certain amount/value of goods that are free of Customs duty and exempt Goods and Services tax (GST) into New Zealand. This is called your duty free allowance and personal goods concession. It is important to review these for any purchases you make on The Mall.
Your duty free allowance entitles you to bring into New Zealand the following quantities of alcohol products free of customs duty and GST provided you are over 17 years of age. You do need to be 18 years or over to purchase.
- Up to six bottles (4.5 litres) of wine, champagne, port or sherry or
- Up to twelve cans (4.5 litres) of beer
- And three bottles (or other containers) each containing not more than 1125ml of spirits, liqueur, or other spirituous beverages
Goods other than alcohol and tobacco, whether purchased overseas or purchased duty free in New Zealand, that have a combined total value not exceeding NZ$700 may also be brought as part of your personal goods concession.
When travelling overseas there are legal limits on the amount of duty free alcohol and other goods you can take with you. These amounts will vary depending on the country you are flying into. We always recommend you check the latest limits and exemptions.
Your order can be picked up at an Auckland Airport Collection Point. There is one in departures and one at arrivals in the international terminal. Alternatively, if you are arriving between 11pm and 6am you will be able to collect your order from our lockers. See map
Please bring your order confirmation email and your passport. If you are collecting from lockers you will have been sent an email with your access code, be sure to have this on you in order to collect your order.
If you’re departing Auckland Airport, we recommend that you come to the Auckland Airport Collection Point at least 60 minutes before your flight. If you miss your pickup time or your flight details have changed please let us know as soon as possible.
When you collect your order you will have the opportunity to inspect the items and sign for them.
If you need to return an item, our Collection Point team are there to help you. If you are collecting after hours please return the item to your locker and our team will be in touch as soon as possible. You may also like to view our Returns & refunds which provides information on how this works and outlines the individual retailer's returns and refunds policies.
After Hours Collections
If your order needs to be collected after the Auckland Airport Collection Point desk is closed, your order will be placed in the lockers next to the desk. All the details you will need to collect your order will be provided in your Order Confirmation and Ready to Collect Email.
