Seagate IronWolf 10TB NAS Internal HDD Designed for use in 1-8 bay NAS environments within home, SOHO, and SMB environments, the 10TB IronWolf 7200 rpm SATA III 3.5" Internal NAS HDD (CMR) from Seagate is built to withstand 24x7 operations, or 8760 hours per year. This 10TB drive has been equipped with a SATA III 6 Gb/s interface, a rotational speed of 7200 rpm, a 3.5" form factor, air drive design, and a 256MB cache, providing users with an ample storage capacity and data transfer speeds of up to 210 MB/s. This IronWolf hard drive also has an MTBF rating of 1 million hours, 600,000 load/unload cycles, 1 in 1015 non-recoverable read errors per bits read, and a workload rate of up to 180TB per year. Optimized for NAS with AgileArray AgileArray is built for dual-plane balancing and RAID optimization in multi-bay environments with advanced power management IronWolf Health Management IronWolf Health Management focuses on prevention, intervention, and recovery Reduced Lag Times Improved performance means reduced lag times or downtime for users during high traffic time for the NAS Rotational Vibration (RV) Sensors IronWolf comes standard with RV sensors to maintain high performance in multi-bay NAS enclosures Multi-User Environments IronWolf provides a workload rate of 180TB per year, which means that multiple users can upload and download data to the NAS server, knowing that IronWolf can handle the workload, whether you are a creative professional or small business Designed for Always-On, Always-Accessible 24/7 Performance Access data on your NAS virtually any time, whether remotely or on site Cache Memory IronWolf provides 256MB of cache memory, allowing your NAS to serve data faster 1.0 Million Hours MTBF | Limited 3-Year Warranty This represents an improved total cost of ownership (TCO) over desktop drives with reduced maintenance costs Designed for 24x7 Performance Access your data on your NAS at virtually any time, whether remotely or on site Best-Fit Applications 1-8 bay business network attached storage (NAS)
- Formatted (512 bytes/sector)
- 10TB
- Heads
- 10
- Discs
- 5
- Bytes per logical sector
- 512
- Bytes per physical sector
- 4096
- Recording density, KBPI (Kb/in max)
- 2499
- Track density, KTPI (ktracks/in, 0 skew)
- 487
- Areal density, (Gb/in2, @ 0 skew mid-disk)
- 1215
- Spindle speed (RPM)
- 7200
- Internal data transfer rate (Mb/s max)
- 2169
- Sustained data transfer rate OD (MiB/s max)
- 200 (210MB/s max)
- I/O data-transfer rate (MB/s max)
- 600
- ATA data-transfer modes supported
- - PIO modes 0-4
- - Multiword DMA modes 0-2
- - Ultra DMA modes 0-6
- Cache buffer
- 256MB (262,144KB)
- Weight (maximum)
- 720g (1.587 lb)
- Average latency
- 4.16ms
- Power-on to ready (sec) (typ/max)
- 23/30
- Standby to ready (sec) (typ/max)
- 23/30
- Startup current (typical) 12V (peak)
- 1.8A
- Voltage tolerance (including noise)
- - 5V ±5%
- - 12V ±10%
- Operating ambient temperature (min °C)
- 0°C (Ambient)
- Operating temperature (max °C)
- 65°C (Drive Reported Temperature) †
- Non-Operating temperature
- -40° to 70°C (Ambient Temperature, see sections 2.6.1 and 2.10)
- Temperature gradient (°C per hour max)
- - 20°C (operating)
- - 20°C (nonoperating)
- Relative humidity
- - 5% to 95% (operating)
- - 5% to 95% (nonoperating)
- Relative humidity gradient
- 20% per hour max
- Altitude, operating
- - -304.8 m to 3,048 m
- - (-1000 ft to 10,000+ ft)
- Altitude, nonoperating (below mean sea level, max)
- - -304.8 m to 12,192 m
- - (-1000 ft to 40,000+ ft)
- Operational Shock (max at 2 ms - typical)
- Read 70 Gs / Write 40 Gs
- Non-Operational Shock (max at 2 ms - typical)
- 300 Gs
- Linear Random Operating Vibration
- 10-500 Hz: 1.04Grms
- Random Rotary Operating Vibration
- 20-1500Hz: 12.5 rads/s²
- Linear Random Non-Operating Vibration
- 10-500 Hz: 2.0 Grms ref
- Idle
- - 2.8 (typical)
- - 3.0 (max)
- - During periods of drive idle, some offline activity may occur according to the
- SMART specification, which may increase acoustic and power to operational levels
- Performance seek 3.2 (typical)
- 3.4 (max)
- Nonrecoverable read errors
- 1 sector per 10 bits read
- Annualized Failure Rate (AFR)
- 0.87% based on 8760 POH
- Maximum Rated Workload
- - Maximum rate of <180TB/year
- - Workloads exceeding the annualized rate may degrade the drive MTBF and impact product
- reliability. The Annualized Workload Rate is in units of TB per year, or TB per 8760 power on
- hours. Workload Rate = TB transferred * (8760 / recorded power on hours).
- Load-unload cycles (command controlled)
- 600,000
- Supports Hotplug operation per Serial ATA Revision 3.3 specification
- Yes
As an international traveller you are entitled to bring a certain amount/value of goods that are free of Customs duty and exempt Goods and Services tax (GST) into New Zealand. This is called your duty free allowance and personal goods concession. It is important to review these for any purchases you make on The Mall.
Your duty free allowance entitles you to bring into New Zealand the following quantities of alcohol products free of customs duty and GST provided you are over 17 years of age. You do need to be 18 years or over to purchase.
- Up to six bottles (4.5 litres) of wine, champagne, port or sherry or
- Up to twelve cans (4.5 litres) of beer
- And three bottles (or other containers) each containing not more than 1125ml of spirits, liqueur, or other spirituous beverages
Goods other than alcohol and tobacco, whether purchased overseas or purchased duty free in New Zealand, that have a combined total value not exceeding NZ$700 may also be brought as part of your personal goods concession.
When travelling overseas there are legal limits on the amount of duty free alcohol and other goods you can take with you. These amounts will vary depending on the country you are flying into. We always recommend you check the latest limits and exemptions.
Your order can be picked up at an Auckland Airport Collection Point. There is one in departures and one at arrivals in the international terminal. Alternatively, if you are arriving between 11pm and 6am you will be able to collect your order from our lockers. See map
Please bring your order confirmation email and your passport. If you are collecting from lockers you will have been sent an email with your access code, be sure to have this on you in order to collect your order.
If you’re departing Auckland Airport, we recommend that you come to the Auckland Airport Collection Point at least 60 minutes before your flight. If you miss your pickup time or your flight details have changed please let us know as soon as possible.
When you collect your order you will have the opportunity to inspect the items and sign for them.
If you need to return an item, our Collection Point team are there to help you. If you are collecting after hours please return the item to your locker and our team will be in touch as soon as possible. You may also like to view our Returns & refunds which provides information on how this works and outlines the individual retailer's returns and refunds policies.
After Hours Collections
If your order needs to be collected after the Auckland Airport Collection Point desk is closed, your order will be placed in the lockers next to the desk. All the details you will need to collect your order will be provided in your Order Confirmation and Ready to Collect Email.