Teltonika RUTX14 4G LET CAT12 AC867 WiFi 5 Industrial Router
RUTX14 4G LTE CAT12 INDUSTRIAL CELLULAR ROUTER - 4G LTE CAT12Download up to 600 Mbps. Upload up to 150 Mbps - WIFI &; BTWave-2 802.11ac Dual Band WIFI and Bluetooth LE - DUAL SIMWith auto failover, backup WAN and other switching scenarios - LOAD BALANCINGAllows to use multiple WAN sources to increase throughput - GNSSGlobal Navigation Satellite System for location services with geofencing functionality - RMSCompatible with Teltonika Remote Management System
MEET THE RUTX14 - RUTX14 is the fastest single modem LTE router in our portfolio. - 5 x Gigabit Ethernet ports, Wave-2 802.11ac Dual-Band Wi-Fi, Bluetooth LE, USB interfaces, dual SIM for advanced throughput and ultra-reliable connectivity. - Equipped with advanced security features like multiple VPN's, firewall &; cyber attack prevention. - Combination of fast LTE CAT12 connectivity, wide range of physical interfaces, extensive RutOS functionality and great remote management capabilities make this device an excellent choice for primary or backup connectivity.
- Mobile module
- 4G (LTE) - Cat 12 up to 600 Mbps, 3G - up to 42 Mbps
- SIM/mobile module switch
- 2 SIM cards, auto switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail
- Status
- Signal strength, SINR, RSRP, RSRQ, Bytes sent/received, connected band, carrier aggregation, IMSI, ICCID,
- SMS
- SMS status, SMS configuration, send/read SMS via HTTP POST/GET, Email to SMS, SMS to Email, SMS to HTTP, SMS to SMS, SMS auto replay
- Black/White list (planned)
- Operator black/white list
- Multiple PDN
- Possibility to use different PDNs for multiple network access and services
- Band management
- Band lock, Used band status display
- APN
- Auto APN
- Bridge mode
- Direct connection (bridge) between mobile ISP and device on LAN
- Wireless mode
- 802.11b/g/n/ac Wave 2 (WiFi 5) with data transmission rates up to 867 Mbps (Dual Band, MU-MIMO), 802.11r fast transition, Access Point (AP), Station (STA)
- WiFi security
- WPA3-EAP, WPA3-SAE, WPA2-Enterprise-PEAP, WPA2-PSK, WEP; AES-CCMP, TKIP, Auto Cipher modes, client separation
- ESSID
- ESSID stealth mode
- WiFi users
- Up to 150 simultaneous connections
- Wireless Hotspot
- Captive portal (Hotspot), internal/external Radius server, built in customizable landing page
- WAN
- 1 x WAN port (can be configured as LAN) 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
- LAN
- 4 x LAN ports, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX
- Bluetooth 4.0
- Bluetooth low energy (LE) for short range communication
- Routing
- Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP)
- Network protocols
- TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet client, SNMP, MQTT, Wake on LAN (WOL), DLNA
- VoIP passthrough support
- H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
- Connection monitoring
- Ping Reboot, Wget reboot, Periodic Reboot, LCP and ICMP for link inspection
- Firewall
- Port forwards, traffic rules, custom rules
- DHCP
- Static and dynamic IP allocation, DHCP Relay, Relayd
- QoS / Smart Queue Management (SQM)
- Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
- DDNS
- Supported >25 service providers, others can be configured manually
- Network backup
- VRRP, Mobile, Wired and WiFi WAN options, each of which can be used as an automatic Failover
- Load balancing
- Balance Internet traffic over multiple WAN connections
- SSHFS
- Possibility to mount remote file system via SSH protocol
- Authentication
- Pre-shared key, digital certificates, X.509 certificates
- Firewall
- Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
- Attack prevention
- DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
- VLAN
- Port and tag based VLAN separation
- Mobile quota control
- Custom data limits for both SIM cards
- WEB filter
- Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only
- Access control
- Flexible access control of TCP, UDP, ICMP packets, MAC address filter
- OpenVPN
- Multiple clients and a server can run simultaneously, 12 encryption methods
- OpenVPN Encryption
- DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC
- IPsec
- IKEv1, IKEv2, with 5 encryption methods for IPsec (DES, 3DES, AES128, AES192, AES256)
- GRE
- GRE tunnel
- PPTP, L2TP
- Client/Server instances can run simultaneously, L2TPv3 support
- Stunnel
- Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program's code
- DMVPN
- Method of building scalable IPsec VPNs
- SSTP
- SSTP client instance support
- ZeroTier
- ZeroTier VPN client support
- WireGuard
- WireGuard VPN client and server support
- ID filtering
- Respond to one ID in range [1;255] or any
- Allow remote access
- Allow access through WAN
- Custom registers
- Modbus TCP custom register block, which allows to read/write to a file inside the router, and can be used to extend Modbus TCP slave functionality
- Supported functions
- 01, 02, 03, 04, 05, 06, 15, 16
- Supported data formats
- 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII
- Gateway
- Allows sending commands and receiving data from MODBUS Master through the MQTT broker
- Supported modes
- TCP Master, DNP3 Outstation
- Protocols
- HTTP(S), MQTT, Azure MQTT, Kinesis
- Clouds of things
- Allows monitoring of: Device data, Mobile data, Network info, Availability
- ThingWorx
- Allows monitoring of: WAN Type, WAN IP Mobile Operator Name, Mobile Signal Strength, Mobile Network Type
- Cumulocity
- Allows monitoring of: Device Model, Revision and Serial Number, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength, WAN Type and IP
- Azure IoT Hub
- Can send device IP, Number of bytes send/received/ 3G connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, Sim State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type, Temperature, PIN count to Azure IoT Hub server
- WEB UI
- HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log
- FOTA
- Firmware update from server, automatic notification
- SSH
- SSH (v1, v2)
- SMS
- SMS status, SMS configuration, send/read SMS via HTTP POST/GET
- CALL
- Reboot, Status, Mobile data on/off, Output on/off
- TR-069
- OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
- MQTT
- MQTT Broker, MQTT publisher
- SNMP
- SNMP (v1, v2, v3), SNMP trap
- JSON-RPC
- Management API over HTTP/HTTPS
- MODBUS
- MODBUS TCP status/control
- RMS
- Teltonika Remote Management System (RMS)
- CPU
- Quad-core ARM Cortex A7, 717 MHz
- RAM
- 256 MB, DDR3
- FLASH storage
- 256 MB, SPI Flash
- WEB UI
- Update FW from file, check FW on server, configuration profiles, configuration backup
- FOTA
- Update FW/configuration from server
- RMS
- Update FW/configuration for multiple devices at once
- Keep settings
- Update FW without losing current configuration
- Operating system
- RutOS (OpenWrt based Linux OS)
- Supported languages
- Busybox shell, Lua, C, C++
- Development tools
- SDK package with build environment provided
- GNSS
- GPS, GLONASS, BeiDou, Galileo and QZSS
- Coordinates
- GNSS coordinates via WebUI, SMS, TAVL, RMS
- NMEA
- NMEA 0183
- Server software
- Supported server software: TAVL, RMS
- Geofencing
- Configurable multiple geofence zones
- Data rate
- USB 2.0
- Applications
- Samba share, USB-to-serial
- External devices
- Possibility to connect external HDD, flash drive, additional modem, printer
- Storage formats
- FAT, FAT32, NTFS
- Input
- 1 x Digital Input, 0 - 6 V detected as logic low, 8 - 30 V detected as logic high
- Output
- 1 x Digital Output, Open collector output, max output 30 V, 300 mA
- Events
- SMS, Email, RMS
- I/O juggler
- Allows to set certain I/O conditions to initiate event
- Connector
- 4 pin industrial DC power socket
- Input voltage range
- 9 - 50 VDC, reverse polarity protection, voltage surge/transient protection
- PoE (passive)
- Passive PoE. Possibility to power up through LAN1 port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards
- Power consumption
- Idle: <4 W, Max: <22 W
- Ethernet
- 5 x RJ45 ports, 10/100/1000 Mbps
- I/Os
- 1 x Digital Input, 1 x Digital Output on 4 pin power connector
- Status LEDs
- 2 x connection status LEDs, 3 x connection strength LEDs, 10 x Ethernet port status LEDs, 4 x WAN status LEDs, 1x Power LED, 2 x 2.4G and 5G WiFi LEDs
- SIM
- 2 x SIM slots (Mini SIM - 2FF), 1.8 V/3 V, external SIM holders
- Power
- 1 x 4 pin DC connector
- Antennas
- 4 x SMA for LTE, 2 x RP-SMA for WiFi, 1 x RP-SMA for Bluetooth, 1 x SMA for GNNS
- USB
- 1 x USB A port for external devices
- Reset
- Reboot/User default reset/Factory reset button
- Other
- 1 x Grounding screw
- Casing material
- Full aluminium housing
- Dimensions (W x H x D)
- 132 x 44 x 95 mm
- Weight
- 515 g
- Mounting options
- DIN rail (can be mounted on two sides), flat surface placement
- Operating temperature
- -40 C to 75 C
- Operating humidity
- 10 % to 90 % non-condensing
As an international traveller you are entitled to bring a certain amount/value of goods that are free of Customs duty and exempt Goods and Services tax (GST) into New Zealand. This is called your duty free allowance and personal goods concession. It is important to review these for any purchases you make on The Mall.
Your duty free allowance entitles you to bring into New Zealand the following quantities of alcohol products free of customs duty and GST provided you are over 17 years of age. You do need to be 18 years or over to purchase.
- Up to six bottles (4.5 litres) of wine, champagne, port or sherry or
- Up to twelve cans (4.5 litres) of beer
- And three bottles (or other containers) each containing not more than 1125ml of spirits, liqueur, or other spirituous beverages
Goods other than alcohol and tobacco, whether purchased overseas or purchased duty free in New Zealand, that have a combined total value not exceeding NZ$700 may also be brought as part of your personal goods concession.
When travelling overseas there are legal limits on the amount of duty free alcohol and other goods you can take with you. These amounts will vary depending on the country you are flying into. We always recommend you check the latest limits and exemptions.
Your order can be picked up at an Auckland Airport Collection Point. There is one in departures and one at arrivals in the international terminal. Alternatively, if you are arriving between 11pm and 6am you will be able to collect your order from our lockers. See map
Please bring your order confirmation email and your passport. If you are collecting from lockers you will have been sent an email with your access code, be sure to have this on you in order to collect your order.
If you’re departing Auckland Airport, we recommend that you come to the Auckland Airport Collection Point at least 60 minutes before your flight. If you miss your pickup time or your flight details have changed please let us know as soon as possible.
When you collect your order you will have the opportunity to inspect the items and sign for them.
If you need to return an item, our Collection Point team are there to help you. If you are collecting after hours please return the item to your locker and our team will be in touch as soon as possible. You may also like to view our Returns & refunds which provides information on how this works and outlines the individual retailer's returns and refunds policies.
After Hours Collections
If your order needs to be collected after the Auckland Airport Collection Point desk is closed, your order will be placed in the lockers next to the desk. All the details you will need to collect your order will be provided in your Order Confirmation and Ready to Collect Email.