Elite Gold 1000 -
Supports ATX 3.1 and PCIe Gen 5.1 standards-
Ideal for RTX 50 GPUs-
Stable performance under high loads at up to 40°C-
Quiet, long-life FDB fan cooling-
1000W output with 80 Plus Gold-certified efficiency-
Fully modular embossed cable design ESSENTIAL GOLD POWER FOR EVERYDAY GAMING BUILDS Cooler Master Elite Gold 1000 is designed for everyday gaming and first-time builds. With full ATX 3.1 compliance support, it's ready for RTX 50 GPUs and future upgrades. Enjoy 80 Plus Gold efficiency, reliable up to 40°C operation, and quiet FDB fan cooling. Fully modular embossed cables simplify installation, dual EPS connectors provide wide compatibility.
High Temperature Resilience Operates reliably at up to 40°C, perfect for extended gaming, rendering, and overclocking. COMPATIBLE WITH ATX 3.1 AND PCIE GEN 5.1 ATX 3.1 delivers tighter voltage and current regulation with peak power support up to 200% of rated output. Elite Gold 1000 meets the full spec and supports PCIe Gen 5.1 for stable, next-gen performance with RTX 50 GPUs and future high-power cards. *All performance stats confirmed in 25°C ambient temperature testing.
QUIET FDB FAN The Fluid Dynamic Bearing (FDB) fan delivers stable, long-lasting, and whisper-quiet cooling performance. *All performance stats confirmed in 25°C ambient temperature testing.
80 PLUS GOLD CERTIFIED EFFICIENCY Cooler Master Elite Gold 1000 achieves over 90% efficiency at typical loads, helping reduce energy waste and minimize heat generation. *All performance stats confirmed in 25°C ambient temperature testing.
Fully Modular Embossed Cable Design The fully modular design comes with flat black cables that can be tailored to each build, offering enhanced grip and a premium look for easier management and a cleaner overall setup. *All performance stats confirmed in 25°C ambient temperature testing.
- ATX Version
- ATX 12V Ver. 3.1
- PFC
- Active PFC
- Input Voltage
- 100-240V
- Input Current
- 6 ~ 12A
- Input Frequency
- 50-60Hz
- Dimensions (L x W x H)
- 140 x 150 x 86 mm
- Fan Size
- 120mm
- Fan Bearing
- FDB
- Efficiency
- =90% @ Typical Load
- 80 PLUS Rating
- 80 PLUS Gold
- ErP 2014 Lot 3
- Yes
- Operating Temperature
- 0-40°C
- Power Good Signal
- 100 - 150 ms
- Hold Up Time
- =16ms at 80% Load
- MTBF
- >100,000 hours? @ 25? ambient
- Protections
- UVP / OVP / OPP / OTP / SCP
- Regulatory
- cTUV us, CB, CE, FCC, BSMI, EAC, RCM, UKCA, RoHS2.0 , REACH
- ATX 24 Pin Connectors
- x1 = 1 (600mm)
- EPS 4+4 Pin Connectors
- x2 = 2 (700mm)
- SATA Connectors
- x9 = 3 (500+100+100mm)
- Peripheral 4 Pin Connectors
- x3 = 1 (500+100+100mm)
- PCI-e 6+2 Pin Connectors
- x6 = 3 (550+120mm)
- 12+4 Pin Connectors
- x1 = 1 (600mm)
- Series
- Elite Series
- Form Factor
- ATX
- Watts
- 1000W
- Modular
- Fully Modular
- 80 Plus Efficiency
- Gold
As an international traveller you are entitled to bring a certain amount/value of goods that are free of Customs duty and exempt Goods and Services tax (GST) into New Zealand. This is called your duty free allowance and personal goods concession. It is important to review these for any purchases you make on The Mall.
Your duty free allowance entitles you to bring into New Zealand the following quantities of alcohol products free of customs duty and GST provided you are over 17 years of age. You do need to be 18 years or over to purchase.
- Up to six bottles (4.5 litres) of wine, champagne, port or sherry or
- Up to twelve cans (4.5 litres) of beer
- And three bottles (or other containers) each containing not more than 1125ml of spirits, liqueur, or other spirituous beverages
Goods other than alcohol and tobacco, whether purchased overseas or purchased duty free in New Zealand, that have a combined total value not exceeding NZ$700 may also be brought as part of your personal goods concession.
When travelling overseas there are legal limits on the amount of duty free alcohol and other goods you can take with you. These amounts will vary depending on the country you are flying into. We always recommend you check the latest limits and exemptions.
Your order can be picked up at an Auckland Airport Collection Point. There is one in departures and one at arrivals in the international terminal. Alternatively, if you are arriving between 11pm and 6am you will be able to collect your order from our lockers. See map
Please bring your order confirmation email and your passport. If you are collecting from lockers you will have been sent an email with your access code, be sure to have this on you in order to collect your order.
If you’re departing Auckland Airport, we recommend that you come to the Auckland Airport Collection Point at least 60 minutes before your flight. If you miss your pickup time or your flight details have changed please let us know as soon as possible.
When you collect your order you will have the opportunity to inspect the items and sign for them.
If you need to return an item, our Collection Point team are there to help you. If you are collecting after hours please return the item to your locker and our team will be in touch as soon as possible. You may also like to view our Returns & refunds which provides information on how this works and outlines the individual retailer's returns and refunds policies.
After Hours Collections
If your order needs to be collected after the Auckland Airport Collection Point desk is closed, your order will be placed in the lockers next to the desk. All the details you will need to collect your order will be provided in your Order Confirmation and Ready to Collect Email.