Corsair HXi Series HX1500i 1500W Platinum ATX 3.1 Power Supply
HX1500i Fully Modular Ultra-Low Noise Platinum ATX 1500 Watt PC Power Supply (AU)
- Compatible with next-gen GPUs
- Dual 12V-2x6 cables
- Fluid Dynamic Bearing fan with Zero RPM mode
- 105°C rated 100% Japanese electrolytic capacitors
- Intel® ATX 3.1 certified, PCIe 5.1 compatible
BUILD WITH THE BEST - 50 SERIES GPUs ARE HERE
Pair a next-gen GPU with quality CORSAIR components for top-shelf performance and no hassles, right out of the box.
NEXT-GEN READY - POWERFUL CONNECTIONS
With dual 12V-2x6 cables and fully modular cabling, HXi Series platinum power supplies have every connection needed to power today's most demanding PC upgrades now and into the future, including the latest generation of power-hungry graphics cards and processors.
iCUE SOFTWARE - YOUR SETUP AT YOUR COMMAND
With CORSAIR iCUE software, you can monitor your power supply performance, toggle single rail or multi rail mode, and control fan speed directly from your desktop.
CYBENETICS PLATINUM CERTIFIED
Steady power output at up to 90% efficiency and Cybenetics™ Platinum certified for lower power consumption, less noise, and cooler temperatures.
ON THE CUTTING-EDGE - ATX 3.1 CERTIFIED
The ATX 3.1 standard demands a high level of reliability and power efficiency. While many CORSAIR PSUs meet these requirements, HXi Series PSUs are formally certified for ATX 3.1 compliance.
Every HXi Series PSU is ready for high-end GPUs with two PCIe 5.1 12V-2x6 GPU power cables featuring dual-color connectors for visual confirmation of a secure connection.
QUIET OPERATION WITH ZERO RPM MODE
A fluid dynamic bearing cooling fan keeps noise to a minimum, with Zero RPM mode to eliminate fan noise completely at low to medium loads.
100% JAPANESE CAPACITORS
Sourced from world-renowned Japanese vendors, every HXi power supply features 100% industrial-grade electrolytic capacitors for unwavering reliability and a long lifespan.
HX1500i POWER TABLE
HX1500i CABLE LISTING
Cybenetics Efficiency
Platinum
Cybenetics Noise
A-
ATX Connector
1
ATX12V Version
3.1
Cable Type
Type 4
Continuous Power W
1500 Watts
EPS Connector
2
Fan Bearing Technology
Fluid Dynamic Bearing
Fan Size MM
140mm
Multi GPU Ready
Yes
SATA Connector
8
PATA Connector
6
Modular
Fully
PCIe Connector
5
MTBF Hours
100,000 hours
PSU Form Factor
ATX
Zero RPM Mode
Yes
80 PLUS Efficiency
Platinum
Weight
5.258
As an international traveller you are entitled to bring a certain amount/value of goods that are free of Customs duty and exempt Goods and Services tax (GST) into New Zealand. This is called your duty free allowance and personal goods concession. It is important to review these for any purchases you make on The Mall.
Your duty free allowance entitles you to bring into New Zealand the following quantities of alcohol products free of customs duty and GST provided you are over 17 years of age. You do need to be 18 years or over to purchase.
- Up to six bottles (4.5 litres) of wine, champagne, port or sherry or
- Up to twelve cans (4.5 litres) of beer
- And three bottles (or other containers) each containing not more than 1125ml of spirits, liqueur, or other spirituous beverages
Goods other than alcohol and tobacco, whether purchased overseas or purchased duty free in New Zealand, that have a combined total value not exceeding NZ$700 may also be brought as part of your personal goods concession.
When travelling overseas there are legal limits on the amount of duty free alcohol and other goods you can take with you. These amounts will vary depending on the country you are flying into. We always recommend you check the latest limits and exemptions.
Your order can be picked up at an Auckland Airport Collection Point. There is one in departures and one at arrivals in the international terminal. Alternatively, if you are arriving between 11pm and 6am you will be able to collect your order from our lockers. See map
Please bring your order confirmation email and your passport. If you are collecting from lockers you will have been sent an email with your access code, be sure to have this on you in order to collect your order.
If you’re departing Auckland Airport, we recommend that you come to the Auckland Airport Collection Point at least 60 minutes before your flight. If you miss your pickup time or your flight details have changed please let us know as soon as possible.
When you collect your order you will have the opportunity to inspect the items and sign for them.
If you need to return an item, our Collection Point team are there to help you. If you are collecting after hours please return the item to your locker and our team will be in touch as soon as possible. You may also like to view our Returns & refunds which provides information on how this works and outlines the individual retailer's returns and refunds policies.
After Hours Collections
If your order needs to be collected after the Auckland Airport Collection Point desk is closed, your order will be placed in the lockers next to the desk. All the details you will need to collect your order will be provided in your Order Confirmation and Ready to Collect Email.
