Raspberry Pi Case Argon ONE V3 M.2 NVME Case For Raspberry Pi 5
M.2 NVMe Drive Compatibility: Other drives may also be compatible but we have not tested yet.
- Argon Dataterm
- Official Raspberry Pi SSD
- Western Digital SN850
- Western Digital SN740
- Western Digital SN570
- Western Digital SN530
- Western Digital Black SN750 SE (Phison Controller)
- WD Blue SN580 NVME
- Samsung 980 Pro
- Samsung 980
- Sabrent Rocket Nano
- Sabrent Rocket 4.0
- PNY CS1030
- Origin Inception TLC830 Pro NVMe
- Netac NV3000 NVMe SSD
- Netac NV2000 NVMe SSD
- Lexar NM710
- Lexar NM620
- Kioxia Exceria NVMe SSD
- Kioxia Exceria G2 NVMe SSD
- Kingston KC3000
- Kingston SNV2S NV2 Gen4 PCIe NVMe M.2 2280 Solid-State Drive
- Inland PCIe NVMe SSD
- Crucial P2 M.2
- Axe Memory Generic Drive
- AData XPG SX8200 Pro
- Argon ONE V3 M.2 NVME Case further expands your Raspberry Pi 5 potential with included M.2 NVME Expansion Board support.
- Boot your Raspberry Pi 5 from an NVME M.2 Drive.
- Built-in HEATSINK for your M.2 NVME Drive
- Enjoy faster and higher storage access by connecting M.2 NVME drives via the PCIe slot on the Raspberry Pi 5
- Versatile M.2 NVME support compatible with any M.2 NVME with M-Key up to 2280 size
- Greater thermal management on M.2 NVME with included aluminum heatsink specific to M.2 drive to keep it cool, efficient and working longer
- Reliable and consistent data transfer with included FPC impedance controlled cable
- Argon ONE V3 M.2 NVME Case is now made compatible for Raspberry Pi 5 with upgraded features and all new black finish.
- Better Active Cooling with the blower type PWM programmable 30mm fan. Repositioned within the case to be more efficient and quiet.
- Improved Passive Cooling with the addition of heatsink on the power management chip of the Raspberry Pi 5 aside from its CPU, which both get hot during heavy use.
- Better communication and power management with the Raspberry Pi 5 thru
Raspberry Pi's RP2040 chip, which controls the features and functions of the Argon ONE V3, like fan speed, power management state (e.g. boot manually or automatically after a power outage by simply setting the jumper pins inside the case) allowing you to use the Argon ONE however you see fit.
- Power button located at the back can perform the following with the installation of a open sourced script allows for safe shutdown, reboot and forced shutdown
- Cable management remains exquisite with two full-sized HDMI ports neatly placed at the back allows the Raspberry Pi 5 to use two monitors simultaneously
- Sleek magnetic cover to the access port of the custom color coded GPIO Pins.
- Built-in IR receiver allows the Argon ONE V3 to be easily usable with the Argon IR remote meaning the case now makes for an even better media player!
As an international traveller you are entitled to bring a certain amount/value of goods that are free of Customs duty and exempt Goods and Services tax (GST) into New Zealand. This is called your duty free allowance and personal goods concession. It is important to review these for any purchases you make on The Mall.
Your duty free allowance entitles you to bring into New Zealand the following quantities of alcohol products free of customs duty and GST provided you are over 17 years of age. You do need to be 18 years or over to purchase.
- Up to six bottles (4.5 litres) of wine, champagne, port or sherry or
- Up to twelve cans (4.5 litres) of beer
- And three bottles (or other containers) each containing not more than 1125ml of spirits, liqueur, or other spirituous beverages
Goods other than alcohol and tobacco, whether purchased overseas or purchased duty free in New Zealand, that have a combined total value not exceeding NZ$700 may also be brought as part of your personal goods concession.
When travelling overseas there are legal limits on the amount of duty free alcohol and other goods you can take with you. These amounts will vary depending on the country you are flying into. We always recommend you check the latest limits and exemptions.
Your order can be picked up at an Auckland Airport Collection Point. There is one in departures and one at arrivals in the international terminal. Alternatively, if you are arriving between 11pm and 6am you will be able to collect your order from our lockers. See map
Please bring your order confirmation email and your passport. If you are collecting from lockers you will have been sent an email with your access code, be sure to have this on you in order to collect your order.
If you’re departing Auckland Airport, we recommend that you come to the Auckland Airport Collection Point at least 60 minutes before your flight. If you miss your pickup time or your flight details have changed please let us know as soon as possible.
When you collect your order you will have the opportunity to inspect the items and sign for them.
If you need to return an item, our Collection Point team are there to help you. If you are collecting after hours please return the item to your locker and our team will be in touch as soon as possible. You may also like to view our Returns & refunds which provides information on how this works and outlines the individual retailer's returns and refunds policies.
After Hours Collections
If your order needs to be collected after the Auckland Airport Collection Point desk is closed, your order will be placed in the lockers next to the desk. All the details you will need to collect your order will be provided in your Order Confirmation and Ready to Collect Email.